2012-06-20_PERMIT FILE - C2010089 ‎(36)‎

• Permit No: C2010089
• IBM Index Class Name: PERMIT FILE
• Doc Date: 6/20/2012
• Doc Name: Surface Water Monitoring Data
• Section_Exhibit Name: Appendix 2.04.7-2
• Media Type: D
• Archive: No

ACZ Laboratories, Inc.
2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493
Western Fuels New Horizon Mine
ACZ ID WORKNUM PARAMETER
METHOD QUAL DESCRIPTION
L86882 - 02 WG298380 Sodium, dissolved
WG298312 Nitrate /Nitrite as N, dissolved
REPAD.15.06.05.01
Nitrite as N, dissolved
WG298605 Nitrogen, ammonia M350.1 - Automated Phenate
WG298409 Residue, Non - Filterable (TSS) @105C SM2540D
WG298687 Sulfate D516-02 - Turbidimetric
WG298313 Sulfide as S
WG298410 Total Alkalinity
L86882 - 03 WG298605 Nitrogen, ammonia
L86882 - 04 WG298605 Nitrogen, ammonia
Inorganic Extended
Qualifier Report
ACZ Project ID: L86882
M200.7 ICP BB Target analyte detected in calibration blank at or above
acceptance limit. Sample value was > 10X the
concentration in the calibration blank.
M353 2 - Automated Cadmium HE Analysis performed past holding time. Method holding time
Reduction is less than or equal to 7 days and sample was received
with less than half of the holding time remaining (refer to
item C5 of ACZ's Terms & Conditions).
M353.2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data
Reduction validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
M353.2 - Automated Cadmium HE Analysis performed past holding time. Method holding time
Reduction is less than or equal to 7 days and sample was received
with less than half of the holding time remaining (refer to
item C5 of ACZ's Terms & Conditions).
M353.2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data
Reduction validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
RA Relative Percent Difference (RPD) was not used for data
validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
RA Relative Percent Difference (RPD) was not used for data
validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
M3 The spike recovery value is unusable since the analyte
concentration in the sample is disproportionate to the spike
level. The recovery of the associated control sample (LCS
or LFB) was acceptable.
376.2 - Methylene Blue RA Relative Percent Difference (RPD) was not used for data
validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
SM2320B - Titration RA Relative Percent Difference (RPD) was not used for data
validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
M350.1 - Automated Phenate RA Relative Percent Difference (RPD) was not used for data
validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
M350.1 - Automated Phenate RA Relative Percent Difference (RPD) was not used for data
validation because the sample concentration is too low for
accurate evaluation (< 10x MDL).
Page 10 of 15