2012-07-06_PERMIT FILE - P2012014 (2)

Home Browse Search

A. Provide plant name and seeding rate 7 (FORM 2 - Public filing) 12. List the seed mixture to be used in the re- establishment of vegetation. See the attached seed mixture calculation to obtain PLS /acre. For assistance with formulating seed mixtures and rates, contact the local NRCS if on private land, BLM/USFS if on public land or State Land Board if on state land. Plant Name Seed mix details are provided in the exi drill pad and access road to be covered Please refer to the column in attached T applicable to each drill pad. Seeding Rate (PLS /acre) Sting Prospecting NOI's issued for each under this ground water discharge NOI. able 1 which provides the NOI number B. Describe the method for seed bed preparation, and application method for grass /forb seeding: Details regarding the method of seeding are provided in the original prospecting NOI for each drill pad and access road to be covered under this ground water discharge NOI. Refer to the column in attached Table 1 which provides the original prospccting NOI number for each drill pad. Basically. once soil material has been evenly redistributed over the drill pad and associated access road, the approved seed mix will be drilled or broadcast over the disturbed area. Seeding will occur in the tall with the early spring serving as an alternative should fall sccding not be completed. V. TERMS AND CONDITIONS FOR PROSPECTING OPERATIONS: 3. Reclamation measures shall be fulfilled in a timely manner and completed within five (5) years of completion of prospecting activities. 4. The prospecting operations described in this Notice will be conducted in such a manner as to minimize surface disturbances. In addition to the measures required in Rule 5, precautions to be taken include: A. Confinement of operations to areas near existing roads or trails, where practicable. Existing roads which are to remain as permanent roads after prospecting activities are completed shall be left in a condition equal to or better than the pre - prospecting condition; B. Drilling shall be conducted in such a way as to prevent cuttings and fluids from directly entering any dry or flowing stream channel. Drill cuttings must be spread to a depth no greater than one -half (1/2) inch or buried in an approved disposal pit;