1987-12-01_PERMIT FILE - C1981017 ‎(304)‎

• Permit No: C1981017
• IBM Index Class Name: Permit File
• Doc Date: 12/1/1987
• Doc Name: Water Control Plan Train Loadout Area
• Section_Exhibit Name: Chapter VII Volume 9 Appendix VII-H-1
• Media Type: D
• Archive: No

PART I
Page 9 of 19
F. GEIERAL REQUIREMENTS (Cont'd.)
4. Flow Measuring Device
If not already a part of the permitted facility, within ninety (90)
days after the effective date of the permit, a flow measuring device
shall be installed to give representative values of effluent quantities
at the respective discharge points. Unless specifically exempted or
modified in Part I.B.2 of this permit, a flow measuring device will be
applicable at all designated discharge points.
At the request of the Director of the Water Quality Control Division,
or the Regional Administrator of the Environmental Protection Agency,
or their authorized representative, the permittee shall show proof of
the accurac7 of any flow-measuring device used in obtaining data
submitted in the monitoring report. The flow-measuring device must
indicate values within ten (10) percent of the actual flow being
discharged f;.om the facility.
Code: i - 23 Date: 1 - 84