1991-05-24_PERMIT FILE - C1981008A ‎(2)‎

• Permit No: C1981008A
• IBM Index Class Name: PERMIT FILE
• Doc Date: 5/24/1991
• Doc Name: Typical SEDCAD Inputs For Diverisons and Impoundments
• Section_Exhibit Name: Tab 13 Attachment L
• Media Type: D
• Archive: Yes

Typical SEDCAD+ Input
Diversions and Impoundments
Line Typical
Code Parameter Input
10 No. of structures on J1, B1 [; No.
on J1, B2 (; No. on J1, B3)] 1
11 Travel time, Musk. K; Musk. X
[Repeat 10 & 11 for all structures] 0; 0; 0
12 No. of SWS for structure; structure
type; folio; folio; hydrograph print opt
hydrograph print option - "1"=No,
"2"=Yes 1; 2; 2; 1; 1
13 SWS area; curve number; t. conc; As measured; As determined;
travel time; MK; MX; "1"; hydrologic As calculated; 0; 0; 0; 1;
response type (1,2,3) ; RUSLE or MUSLE 2; 0
or SLOSS
For hydrology only, travel time = 0
For only 1 SWS, MK & MX = 0
If using RUSLE, use "-l"
If using MUSLE, use "0"
If using SLOSS, use number of segments
14 K factor; length; slope; CP factor; As determined; As measured;
Part. dirt. #• "0"• 11011• "0" [; surf. As calculated; As
cond; seg area; "50"] determined; 1
[For Hydrology ONLY, enter "0"; ""0";
11011; "0" "0"]
[Brackets indicate SLOSS input
parameters - Repeat 14 for each
SLOSS segment]
[Repeat 13 & 14 for each No. of SWS for the
structure]
Enter Structure Data [NULL structure return to
line code 12] :
Revised 05/24/91