Laserfiche WebLink
possible, The regulatory sgenciee must recognize the fact that in these particular areas, • <br />the actual pernit boundsry will not be located where the signs are placed. If, during an <br />inspection the exeet location must be determined, Seneca will locate the line in question <br />upon request from the inspector. <br />Buffer Zone Signs. Buffer zones will be posted with signs such es the one shown in Figure <br />26-3. A buffer zone has been estsblished et the east end of the tie across haul road. <br />Topsoil Markers. Stockpiled topsoil areas will be marked with signs reading "TOPSOIL", <br />end are 8° x 24" fn size. An example of this sign is shown in Figure 26.4. Topsoil <br />markers will remain in piece until the topsoil materials are removed. <br />Blestino Signs. Two (2) types of signs are used for blasting areas: Signs 8" x 24" with <br />2" red, bold letters reading "BLASTING AREA" will be displayed within 50 feet of access <br />and haul roads, and 100 feet of any public road right-of-way and at the edge of the <br />blactinp areas. <br />A blasting warning sign, 24" x 36° in site, is located at the mine entrance next to the • <br />mine identification sign. This sign reads: "BLASTING YARNING SIGNAL three short whistles <br />from en air horn, ALL CLEAR SIGNAL one long whistle". Examples of these signs are shown <br />in Figure 26-5. <br /> <br />2 Revised 05/25/95 <br />