Laserfiche WebLink
4 (FORM 1 - All information for DRMS use and confidential filing) <br />5. Describe proposed surface excavation or other land disturbance, including roads, pits, trenches, waste piles, drill pads and <br />collar areas of underground workings, ponds, etc... <br />An existing adit portal will be rehabilitated to commence underground exploration. An existing <br />shaft (London Butte Shaft) will be rehabilitated to provide a secondary escapeway and <br />• <br />.. <br />necessary draw down pumping rate. <br />6. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, including anticipated number of holes, <br />diameter, depth, location, etc... Submit additional pages if necessary: <br />A. Drill Pads: Quantity 4.00 A verage Width 40. 00 (ft) Average Length 100.00 (ft) <br />B. Drill Holes: Quantity 4.00 Depth 600 (avg. depth) (ft Diameter 12.00 (in) <br />C. Mud Pits: Quantity 4.00 Average Width 20.00 (ft) Average Length 20.00 (ft) <br />Average Depth 8 (ft) <br />Described proposed underground work, including reopening of old workings, advancement of adits or shafts, <br />trenches, pits, cuts, rock dumps, or other types of disturbance, describe type, quantity and general dimensions: <br />The London Butte Adit was rehabilitated in the late 1980's. The outer 60 feet of the adit <br />required timbering. Surtace subsidence indicates approximately 40 has tailed and will <br />with large diameter CMP. The shaft is also timbered for about 60 feet. The same <br />technique will be used. <br />D. Other Disturbances (please describe): <br />None. <br />E. Indicate Chemicals and Fuels used or stored on site. List type, quantity and method to store. <br />None. <br />F. New Road(s): Length (ft) Width (ft) <br />Significantly Upgraded Road(s) Length (ft) Width (ft) <br />Are culverts or other crossings proposed? If so, please describe: <br />