2011-09-27_REVISION - M1990057 ‎(10)‎

• Permit No: M1990057
• IBM Index Class Name: REVISION
• Doc Date: 9/27/2011
• Doc Name: Revised TR-03, with Adequacy Responses Incorporated.
• From: The Union Milling Company
• To: DRMS
• Type & Sequence: TR3
• Email Name: MAC
• Media Type: D
• Archive: No

Figure C -4: 45 mil Polyproplyene Liner
CoNalmowl lokry Hc.
45-mil Polypropylene Geomembrane — Physical Properties
'Equivalent th 12.000 hours exposure at 0.35 Whn irradiance B.P.T. is black panel temperature.
Note: Factory seams are not a normal condition the supplied sheet described in this start.
Phone: 1 00)44d-4M 2 Fax_ (303) 44793 t .inerGeehs @LangeContainnientcorn wow.l_ar, eContainmenn.com
M199O -057 September 27, 2011
Test Me t od
ftaperty Of Unaged Sheet
872 hi5,(28 4U days) 0) 2 F.
Tolerance are nominal thickness %
ASTM 0 5199
ASTMD 751
0.045' t 10
Thickness over scrim. M. (min)
ASTM 04637
Optical Method
0.013 (0.33D) ndn
Mass per unit ea. Ibf14 (01 (kghn
s
ASTM 0 5261
029 (05) (1- ) tYp
Breaking strength. Ibf (IN) )
(gab tensile at stab rate of 12 inimin.)
ASi7MI D 751
Grab Method A
250 (1.1) min. 300 typ.
250 (1.1) min. 300 typ.
Elongation at break of fabric. %
ASTM D 751
25 typical
25 typxai
Tearing strength. Off (N)
(2 eklnfn. strain rate)
ASTM D5884
(max. load)
100 (445) mim. 160 (712) typ.
Lear temperature flexibility. °F ("C)
ASTM D2135
1B in mandrel
4 hour as temp_
-40 (-40) max.
-50 (-46) typical
Linear D'3rleosionall Change (Shrinkage), %
ASTM D 1204
9.0 max
-0.5 typical
Ozone resistance, 100 pphm,168 hours
ASTM D 1149
No sacks
No sacks
Resistance to water (dlst led absorption
aster 30 days iaxrwrsion 122 °F (50C)
Change in mass. %
ASTM D 471
(coating
compoixnd oily)
1.0 max
05 twical
Hydrostatic resistance, ib&fm. 2 or psi (MPA)
(Mogen burst)
ASTN D 751
Procedure A
350 (2.4) min.
450 (3.1) typical
350 (2.4) mnn.
450 (3.1) typical
Field Seam strength, tbdin_ (kfdfm)
Sean tested in peel a9er weld
Factory Seams, bonded seam strength Ibf
(kN), if amicable
ASTM D 4437
1 in_ wide
ASTM D 751
Grab Method A
30 (5.3) min.
60 (105) typical peat va ire
4 0 0 (0.9) min
Water Vapor pemteamce. Penns
ASTM E 96
0.10 mac
0.05 typical
Puncture resistance.
ASTM D4833
Codex putimcktre)
85 (378) min
110 (489) typical
Resistance to xenon -am weathering'
Xenon-arc. 15.120 k.MTI total ratted
exposure, visual ocndIh n at 10X
ASTM G 155
0.70 W1m
80 `C B.P.T.
No cracks
No loss of
or tearing strength
Figure C -4: 45 mil Polyproplyene Liner
CoNalmowl lokry Hc.
45-mil Polypropylene Geomembrane — Physical Properties
'Equivalent th 12.000 hours exposure at 0.35 Whn irradiance B.P.T. is black panel temperature.
Note: Factory seams are not a normal condition the supplied sheet described in this start.
Phone: 1 00)44d-4M 2 Fax_ (303) 44793 t .inerGeehs @LangeContainnientcorn wow.l_ar, eContainmenn.com
M199O -057 September 27, 2011