2011-06-06_REVISION - M1981185 (62)

Home Browse Search

I Response to CN-01 Third Adequacy Issues - June 6, 2011 • The access roads identified have been removed from Figure F-4 and Figure F-4A. See Attachment C; • Figure 4 and 4A have been combined See Attachment C, • The area referenced on Figure F-4A is pre-existing or undisturbed Th_e Reclamation Plan only provides that "disturbed" areas will be reduced to 1 5H 1V Figure F-4A is, therefore, consistent with the Reclamation Plan, • The shed and outhouse shown on Figure F-5 are pre-existing and will not be reclaimed; Wildcat Mining does not propose to use this shed or outhouse in its mining activities; • Figure F-5a has been revised to show the final configuration of the entire Chief Portal area. See Attachment C• and • The highwall referenced in Figure F-5 is pre-existing or undisturbed The Reclamation Plan only provides that "disturbed" areas will be reduced to 1.511:1v. Figure F-5 is, therefore, consistent with the Reclamation Plan Adequacy Issue #11 The amended application includes approximately 32 maps, yet many of the existing and proposed mine features are not shown correctly. Figure D-1 attempts to provide some details for the mine plan at the May Day 1 level but incorrectly labels the mill facility as "Storage", incorrectly locates the two water tanks, and shows contour lines on top of the structures. Please revise Figure D-1 to correct these inadequacies. Please provide similar scale maps to support the mine plan for each of the areas of affected lands. Please correctly locate the major mine features, including but not limited to all underground mine openings, mine benches, material stockpile areas, the proposed mill facility, and any structures utilized to support the mining and milling operation. Please submit detailed and correct maps, which are compliant with the basic map requirements of Rule 6.2.1(2), and clearly delineate and label the existing and proposed mine features. Response #11 Wildcat Mining is submitting revised maps which comply with Rule 6.2.1(2.) and which clearly delineate and label the existing and proposed mine features, including those identified by DRMS in this adequacy issue See Attachment C Adequacy Issue #12 The Division had previously requested a surface map which identifies the glory hole, associated with the May Day 1 workings, and other pre-permit mine features associated with the historic May Day and Idaho mines. The Applicant's response affirmed the glory hole, and other pre- permit mine features, were located on several of the submitted maps. The glory hole is not identified on any map. Please submit a surface map which delineates and labels the glory hole, associated with the May Day 1 workings, and other pre-permit mine features associated with the Revised 6/6/2011 11 mow.. ??_