My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2009-08-25_PERMIT FILE - C1991078
DRMS
>
Day Forward
>
Permit File
>
Coal
>
C1991078
>
2009-08-25_PERMIT FILE - C1991078
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 3:55:02 PM
Creation date
5/5/2011 11:03:03 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1991078
IBM Index Class Name
Permit File
Doc Date
8/25/2009
Section_Exhibit Name
2.04 Environmental Resources
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
35
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
• 2.04.9 SOILS RESOURCE INFORMATION <br />(1) The Applicant performed a site specific soil survey of <br />the permit and adjacent area during November 1990 and June 1992. <br />The purpose of the survey was to refine the soils resource <br />information which is available from the U.S. Soils Conservation <br />Service, (SCS). The June 1992 survey encompassed the area to be <br />disturbed by mining area number 3. <br />(a) The dominant soils within the permit area that will <br />be disturbed by mining operations are the Barx series, Progresso <br />loam, and Pinon loam. Small areas of the Paradox series occur in <br />the bottom of the drainages. Soils throughout the area are <br />predominantly medium textured moderate to well drained, slight to <br />moderately alkaline, developed in both residuum and alluvium <br />derived from sandstone and shale. Depths vary from shallow, less <br />than 10 inches, to deep, greater than 36 inches in depth. Normal <br />topsoil salvage operations will include the A, B, and C horizons. <br />However, should on site inspection during salvage operations <br />determine that any part or all of the C horizon is not suitable as <br />a plant growth medium, the unsuitable material will not be salvaged <br />for topsoil material. Following is a discussion of each of the <br />soil types that are within and adjacent to the permit area. <br />Soil Map Unit No. 1 <br />• Barx fine sandy loam, 1 to 3 percent slopes. This deep, well <br />drained soil is on terraces and mesas and is formed in alluvium <br />derived dominantly from sandstone. The native vegetation is mainly <br />grasses and shrubs. Elevation is 5,300 to 6,800 feet. The average <br />annual precipitation is 10 to 14 inches, the average annual air <br />temperature is 46 to 48 degrees F, and the average frost-free <br />period is 110 to 130 days. <br />Typically, the surface layer is brown fine sandy loam about 2 <br />inches thick. The subsurface layer is a reddish brown loam 3 <br />inches thick. The upper part of the subsoil is yellowish red or <br />light reddish brown sandy clay loam 16 inches thick. The lower 15 <br />inches of the subsoil is pinkish white loam. The upper 13 inches <br />of the substratum is very pale brown loam, and the lower part to a <br />depth of 74 inches or more is pink loam. In some areas the surface <br />layer is loam or sandy clay loam. <br />Included in this unit is about 10 percent Abra soils and 5 <br />percent Progresso soils. Also included are small areas of Clapper <br />soils and Nyswonqer soils occurring in the small intermittent <br />drainages. <br />Permeability of this Barx soil is moderate. Available water <br />capacity is high. Effective rooting depth is 60 inches or more. <br />Run-off is slow, and the hazard of water erosion is slight. <br />1_.J <br />2.04-18 <br />July 1992 <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.