Laserfiche WebLink
Response to Preliminary County Comments Received on March 17, 2011 <br />the correct boundary of affected lands, and delineates the different boundaries with unique line <br />pattern and color. <br />Response #6 <br />Adequacy Issue #6 has been addressed in the enclosed submitted maps. The may <br />registrations have been rectified to address the itemized discrepancy presented in DRMS <br />comments. <br />Adequacy Issue #7 <br />Figure SWMP-2 delineates and labels two augmentation ponds, one of which is located outside <br />of the affected land boundary. Figure SWMP-2 inappropriately locates the mill facility at the <br />Idaho rather than at the May Day 1 level. The proposed drainage basin boundaries appear <br />random and confusing. Figure SWMP-2 indicates three culverts for the illegal access road, none <br />of which appear to be located at the road and two of which appear to be located beyond the <br />permit boundary. Please revise Figure SWMP-2 to correctly illustrate what is intended. <br />Response #7 <br />Adequacy Issue #7 has been addressed in the enclosed submitted maps. As present in <br />Exhibit D one augmentation pond may be built. The map has been modified accordingly to <br />ensure the proposed structure is located within the affected land boundary. In addition, <br />due to mine plan modifications the Idaho mill no longer exists and has been converted to a <br />core warehouse. The drainage basins delineation remains the same; however more clarity <br />is provided to explain why the basins were delineated. The basin delineation was <br />illustrated to define flows and enable the following design and analysis: <br />• Drainage channel design <br />• Culvert design <br />• Road Ditch design <br />• BMP design <br />• Water quality sampling stage rating analysis <br />Structure locations have been placed with more precision. The supporting design for the <br />DRMS summarized structures are designed and included the application. Wildcat Mining <br />Corporation has also committed to submitting as built drawings for all approved <br />structures. <br />Revised <br />4/14/2011 <br />4