Laserfiche WebLink
HOURLY PRODUCTION sheet 2 of 2 <br />Hauling Capacity : <br />Scraper Payload (weight) Basis : Scraper Bowl (volume) Basis : <br />Material weight : 1,600 pounds/LCY Struck volume : 15.70 LCY <br />Material description : Heaped volume : 21.00 LCY <br />Top Soil Average volume : 18.35 LCY <br />Rated payload : 48,000 pounds Adjusted capacity : 18.35 LCY *** <br />Payload capacity : 30.00 LCY hourly production reflects volume per scraper pair on push-pull models <br />Cycle Time : Job Condition Corrections : Site altitude (ft.) : 4,900 <br /> Scraper Push dozer Source <br />Scraper loading time 0.50 minutes Altitude adj.: 1.000 1.000 (Cat HB) <br />Maneuver and spread time : 0.60 minutes Job efficiency : 0.830 0.830 (Cat HB) <br />* load time per scraper pair on push-pull models Net correction : 0.830 0.830 <br />Travel time : <br />Road condition description :Rutted dirt, little maintenance, no water, 2" tire penetration <br />Haul Route : <br />Seg. # Haul distance (feet) Grade (%) Roll. res. (%) Total res. (%) Velocity (fpm) Travel time (min.)** <br />1 1,000 0.00 5.00 5.00 2218 0.58 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Haul time : 0.58 minutes <br />Return route : <br />travel time for each segment is adjusted for acceleration/deceleration. Return time : 0.50 minutes <br />table velocities are max. attainable per total resistance shown, not average <br />Total scraper team cycle time (load + haul + maneuver and spread + return) : 2.19 minutes <br />Unadjusted unit production/hour : 503.63 LCY/hour *** Adjusted for job conditions : 418.02 LCY/hour <br />Optimal number of scrapers per push dozer : 2 Selected number of scrapers : 2 scraper(s) <br />Adjusted single scraper team (unit) hourly production : 836.03 LCY/hour <br />Adjusted multiple scraper team (fleet) hourly production : 836.03 LCY/hour <br />JOB TIME AND COST <br />Fleet size : 1 Team(s) Total job time : 4.82 Hours <br />Unit cost : $0.884 /LCY Total job cost : $3,566