2009-07-15_REVISION - M1980244 ‎(39)‎

• Permit No: M1980244
• IBM Index Class Name: REVISION
• Doc Date: 7/15/2009
• Doc Name: LOB Relocate- Appendix D- Tech Specs 2
• From: CC&V
• To: DRMS
• Type & Sequence: AM9
• Media Type: D
• Archive: No

amec*
0 SECTION 02777.0 GEOTEXTILE

PART 1: GENERAL
1.01 SUMMARY
This SPECIFICATION describes requirements for the manufacture, supply, and installation of the geotextile in
the Underdrains, and Leak Detection System, as shown on the DRAWINGS; and constriction quality control
monitoring. All procedures, operations, and methods shall be in strict compliance with the
SPECIFICATIONS, the Construction Quality Assurance Plan, and the DRAWINGS.
1.02 SUBMITTALS
A. Submittals with Bid Documents
CONTRACTOR shall provide the following information relating to the geotextile
MANUFACTURER with its proposal.
Information from MANUFACTURER including company name, address, telephone
number, the names of the company president and quality control manager, and narrative of
the company history.
2. Description of MANUFACTURER's manufacturing capabilities:
•
a. Information on plant size, equipment, personnel, number of shifts per day, and
capacity per shift.
b. A list of standard material properties and test methods employed to arrive at the
values for each. As a minimum, the list shall include properties given in Part 2 of
this Section.
3. The Quality Control Manual followed during the manufacturing process including those for
the polymer material and for detecting foreign objects in the finished goods, and a
description of the quality control laboratory facilities, including the name and telephone
number of the quality control manager. Upon review of the Quality Control Manual, the
MANAGER and CERTIFYING ENGINEER may request additional testing during the
manufacturing process at no additional cost to CC&V.
B. CONTRACTOR shall provide the following information after contract award but within ten (10)
days prior to material arrival on-site and prior to commencement of the work:
The geotextile MANUFACTURER shall provide written certification that the geotextile to
be used meets the requirements of the Cresson Project and has been continuously inspected
for the presence of needles and geotextile was found to be needle free.
2. A copy of the MANUFACTURER's geotextile QC test results of properties outlined in Part
2 of this Section. The MANAGER reserves the right to refuse use of any geotextile
supplied without the proper QC documentation.
3. A detailed list of performance criteria for the geosynthetic material being produced for this
project. (Note: Performance criteria are sometimes referred to as "minimum property
values." Refer to Part 2 of this Section for geotextile properties and test: methods.)
Section 02777 Page 1 of 5 September 3, 2008
Geotextile Revision 1
SAProjects\1125 CC&V Phase 5 VLF\I - Tech SpecsVlrequa IFC Specs\02777.rt.doc