Laserfiche WebLink
HOURLY PRODUCTION sheet 2 of 2 <br />Hauling Capacity : <br />Scraper Payload (weight) Basis : Scraper Bowl (volume) Basis : <br />Material weight: 1,600 pounds/LCY Struck volume : 21.00 LCY <br />Material description : Heaped volume : 31.00 LCY <br />Top Soil Average volume : 26.00 LCY <br />Rated payload : 75,000 pounds Adjusted capacity : 26.00 LCY *** <br />Payload capacity : 46.88 LCY hourly production reflects volume per scraper pair on push-pull models <br /> <br />Cycle Time : Job Condition Corrections : Site altitude (ft.) : 8,740 <br /> Scraper Push dozer Source <br />Scraper loading time 1.80 minutes Altitude adj.: 0.980 NA (Cat HB) <br />Maneuver and spread time: 0.60 minutes Job efficiency : 0.830 NA (Cat HB) <br />* load time per scraper pair on push-pull models Net correction : 0.813 NA <br />Travel time : <br />Road condition description : Rutted dirt, little maintenance, no water, 2" tire penetration <br />Haul Route <br />Seg. # Haul distance (feet) Grade (%) Roll. res. (%) Total res. (%) Velocity (fpm) 'Travel time (min.)** <br />1 500 -2.00 5.00 3.00 2800 0.39 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Return route : <br />Haul time : 0.39 minutes <br />2240 0.35 <br />" travel time for each segment is adjusted for acceleration/deceleration. Return time : 0.35 minutes <br />table velocities are max. attainable per total resistance shown, not average <br />Total scraper team cycle time (load + haul + maneuver and spread + return) : 3.14 minutes <br />Unadjusted unit production/hour : 496.77 LCY/hour *** Adjusted for job conditions : 404.07 LCY/hour <br />Optimal number of scrapers per push dozer : NA Selected number of scrapers : 1 scraper(s) <br />Adjusted single scraper team (unit) hourly production : 404.07 LCY/hour <br />Adjusted multiple scraper team (fleet) hourly production : 404.07 - LCY/hour <br />JOB TIME AND COST <br />Fleet size : 1 Team(s) <br />Unit cost : $0.619 /LCY <br />Total job time : 132.03 Hours <br />Total job cost : $33,026