Laserfiche WebLink
I. During 2004, Oxbow Mining, LLC, (Oxbow) drilled two exploration holes within the <br />Operator's disturbed area. The location of the drill sites and access roads are shown <br />on Exhibit F-F, Disturbed Area. <br />'i <br />r1 <br />L~ <br />One site, ECM-04-15, is located along the reclaimed bench access road. The other <br />site, ECM-04-18, is located below the mine bench. It is assumed the roads will be 12- <br />feet wide and the drill sites 100 feet by 50 feet. <br />During 2005 Oxbow plans to construct a vent shaft, install associated ventilation fans <br />and ancillary facilities within the Operator's disturbed area. The disturbance caused by <br />this project will be along the reclaimed bench access road. Oxbow also plans to utilize <br />Pond 3 to collect run-off from its disturbed area. The following table lists the <br />approximate disturbance created by Oxbow: <br />Drill Site Road Length Feet Disturbed Area Acres <br />ECM-04-15 2004 980 0.27 <br />ECM-04-18 2004 590 0.16 <br />2 Drill Sites 2004 100' X 50' 0.23 <br />Fan Site 2005 N/A 2.80 <br />Totals 1,360 3.46 <br />It will be Oxbow's responsibility to reclaim all disturbance caused by its activities within <br />the Operator's disturbed area. Additionally, Oxbow's disturbance will be removed from <br />the Operator's disturbed area. It may be necessary to survey Oxbow's actual <br />disturbance to clearly establish the boundary between Oxbow's and the Operator's <br />disturbed area. <br />MR-14 <br />113x <br />3/05 <br />