Laserfiche WebLink
<br />• <br />MSDS -Diesel <br />Sinclair Oil Corporation -August 2000 <br />7. HANDLING AND STORAGE <br />GENERAL: <br />Ground and bond all transfer and storage equipment. Drums must be grounded/ bonded/ <br />equipped with self- closing valves, pressure vacuum bungs and flame arrestors. Store <br />away from ignition sources in a cool area. Outside or detached storage is preferred. <br />When handling use non-sparking tools and equipment. Do not use as a cleaner or solvent, <br />use only as fuel. Do not siphon by mouth. <br />• <br />8. EXPOSURE CONTROLSJPERSONAL PROTECTION <br />ENGINEERING CONTROLS: <br />Provide ventilation sufficient to prevent exceeding recommended exposure limit or <br />build-up of explosive concentrations of vapor in air. Use explosion-proof equipment. <br />PERSONAL PROTECTION: <br />RESPIRATOR: <br />Approved respiratory protection must be used when vapors or mist concentrations are <br />unknown or exceed the TLV. Avoid prolonged or repeated breathing ofvapor or nests. <br />PROTECTIVE CLOTHING: <br />Use full-face shield, chemical goggles, impervious gloves, boots and whole body <br />protection. <br />9. PHYSICAL AND CHEMICAL PROPERTIES <br />Vapor Pressure: < I PSIA Vapor Density: > 1 <br />Specific Gravity: 0.75 - 0.90 {Air = I ) <br />Solubility in Water: No Freezing Point: 0°F <br />pH: NIA Appearance: colorless, red, blue or amber , <br />Boiling Point: S50° F Physical State: Liquid <br />10. STABILITY AND REACTIVITY <br />GENERAL: <br />This product is stable. <br />INCOMPATIBLE MATERIALS AND COND11'IONS TO AVOID: <br />Strong acids, alkalies and oxidizers. Avoid heat, sparks, #Iame and static electricity. <br />Page 4 of 7 <br />