Laserfiche WebLink
' 1. Method of Measurement: Downstream Drainage Blanket will be measured by plan <br />quantity in place volume in cubic yards (CY) as determined by the dimensions shown on <br />' the construction drawings. <br />2. Basis of Payment: CONTRACTOR will be paid for furnishing all labor, equipment, and <br />' materials and performing all operations necessary to furnish, load, haul, place and compact <br />the Downstream Drainage Blanket Filter Aggregate on the basis of a unit price per plan <br />cubic yard, all in accordance with the Drawings and Specifications. <br />' N. Downstream Earth Buttress <br />1. Method of Measurement: General Fill will be measured by in place volume in cubic yards <br />(CY) as determined by the average end area method using the survey performed by <br />COMPANY or COMPANY'S Representative. <br />2. Basis of Payment: CONTRACTOR will be paid for furnishing all labor, equipment, and <br />materials and performing all operations necessary to excavate, and load from the material <br />source, haul, place, moisten (if necessary) and compact the Downstream Earth Buttress on <br />the basis of a unit price per cubic yard, all in accordance with the Drawings and <br />Specifications. <br />O. Reservoir Discharge Facilities <br />Method of Measurement: Reservoir Dischazge Facilities will be furnished and installed as <br />a lump sum (LS) upon completion, all in accordance with the Drawings and Specifications. <br />2. Basis of Payment: CONTRACTOR will be paid in full for famishing all labor, equipment, <br />and materials, and performing all operations as are necessary to furnish and install the <br />structural concrete intake structure, trash rack, gate, gate control and required structural <br />elements and granular base, furnish and install the structural concrete operator platform, <br />abandon the existing valve and vault, furnish and install the drop structure, furnish and <br />install the RCP outlet and bedding aggregate, and furnish and install outlet energy <br />dissipater, including riprap, granular base, and geotextile fabric. <br />P. Site Restoration <br />Method of Measurement: Site Restoration will be measured by the area in acres (Acres) to <br />the nearest tenth of an acre. The area will be determined based on COMPANY'S survey of <br />the actual horizontal surface area of the area requiring restoration within the construction <br />limits. Areas disturbed outside the construction limits shall be fully restored by <br />CONTRACTOR without cost to COMPANY. <br />2. Basis of Payment: CONTRACTOR will be paid in full for famishing all labor, equipment, <br />and materials, and performing all operations as aze necessary to salvage topsoil, furnish <br />and install the topsoil, furnish and install seed and mulch, all in accordance with the <br />Drawings and Specifications. <br />01270-6 <br />