Laserfiche WebLink
ASTM D 2974 (2000) Test Methods for Moisture, Ash, and <br />Organic Matter of Peat and Other Organic Soils <br />ASTM D 3017 (2001) Water Content of Soil and Rock in Place <br />by Nuclear Methods (Shallow Depth) <br />ASTM D 3776 (1996, R2002) Mass per unit area of <br />Geosynthetics <br />ASTM D 9318 (2000) Liquid Limit, Plastic Limit, and <br />Plasticity Index of Soils <br />ASTM D 4355 (2002) Standard Test Method for Deterioration of <br />Geotextiles by Exposure to Light, Moisture and <br />Heat in a Xenon Arc Type Apparatus <br />ASTM D 9491 (1999, Rev A) Standard Test Methods for Water <br /> Permeability of Geotextiles by Permittivity <br />ASTM D 9533 (1991, R1996) Standard Test Method for Trapezoid <br /> Tearing Strength of Geotextiles <br />ASTM D 4595 (1986, R(2001)) Tensile Properties of <br /> Geotextiles By the Wide-Width Strip Method <br />ASTM D 9632 (1991, R1996) Standard Test Method for Grab <br /> Breaking Load and Elongation of Geotextiles <br />ASTM D 9751 (1999, Rev A) Standard Test Method for <br /> Determining Apparent Opening Size of a <br /> Geotextile <br />ASTM D 4833 (2000, e2002) Standard Test Method for Index <br /> Puncture Resistance of Geotextiles, <br /> Geomembranes, and Related Products <br />ASTM D 9972 (2000) Test Method for pH of Soils <br />ASTM D 5089 (2000, E2002) Measurement of Hydraulic <br /> Conductivity of Saturated Porous Materials Using <br /> a Flexible Wall Pe rmeameter <br />1.3 SUBMITTALS <br />Government approval is required for submittals with a "G" designation; <br />submittals not having a "G" designation or having an "FIO" designation are <br />for information only. When used, a designation following the "G" <br />designation identifies the office that will review the submittal for the <br />Government. The following shall be submitted in accordance with Section <br />01330 - SUBMITTAL PROCEDURES: <br />SD-03 Product Data <br />COIR Fabric; G <br />02340-2 <br />