Laserfiche WebLink
<br />Throughout the site examinations, th <br />consistently, in order of frequency: <br />Sulfate, Dissolved Manganese, Iron, <br />Seneca IIW Surface Water <br /> <br />-2- <br />e following parameters were exceeded <br />Dissolved solids, Silver, Sulfide, <br />and Aluminum. <br />It appears that each surface water site was monitored, and all parameters were <br />tested, except in cases of no-flow or light-flow. The only sites where this <br />occurred were S-1, S-23, S-45, 5-41, and S-5. Site SW-S2W-S67 appeared to <br />have been sampled only twice whereas the remainder showed three times. It <br />also appears that the detection limits for mercury were not met at any site. <br />Throughout the site examinations, the following parameters were exceeded <br />consistently in order of frequency: Total Dissolved Solids, Silver, Sulfate, <br />Dissolved Manganese, Aluminum, Total Iron, Total Manganese, Dissolved Iron. <br />This matches the Seneca II surface water analysis. <br />Please note that because of the vast quantity of data, expected exceedances <br />were checked thoroughly, but usually normal parameters were checked on a <br />random basis. <br />TK/yjb <br />4730E <br />