REP01675 - Laserfiche WebLink

Home Browse Search

1 ' 1.4 Applicable Codes and Regulations ' The work shall conform to applicable federal, state, county, and local regulations. Test procedures shall conform to applicable ASTM standards, as documented in the edition of the ' standards in force at the start of work. ' 2.0 SPECIAL PROVISIONS 2.1 Contractor's Responsibility ' The Contractor shall examine these Specifications and Drawings to be awaze of all conditions at the site affecting execution of the work. These conditions include, but aze not limited to: ' • Selective borrowing from approved material stockpiles and within approved borrow areas; ' Applicable safety and health regulations; • Transportation and access conditions; • Availability of utilities; ' • Subsoil conditions including trafficability of the tailings beach azea; • Location, availability, and condition of constriction materials; • Location, condition and protection of existing impoundment liner and drainage blanket; ' ~ Climate and construction conditions at the site; • Dust abatement requirements; and ' • Water source required for construction. 2.2 Mobilization t Upon receipt of the notice to proceed, the Contractor shall furnish, mobilize, and install such ' temporary works, materials, equipment, and construction facilities as are necessary for the successful completion of the work. The Contractor shall also operate and maintain such temporary works, equipment, and construction facilities throughout the period of construction. t All temporary works, such as sanitation facilities, shall fully comply with the applicable rules and regulations of the governing authorities. The Contractor shall obtain all necessary permits and permissions to utilize roads for mobilization, demobilization, and access to the site. Access to the site is available by using ' existing public roads and Owner's roads. ' -3- 1