Laserfiche WebLink
December 23, 1999 Puge D-/ <br />• APPENDIX D <br />STANDARD OPERATING PROCEDURE FOR EQUIPMENT DECONTAMINATION <br />D.1 INTRODUCTION <br />The purpose of this document is to define the standard operating procedure (SOP) for <br />equipment decontamination at the American Soda, Yankee Gulch Sodium Project. This document <br />describes the materials and procedures for decontaminating the equipment used in groundwater and <br />surface water sampling. This SOP serves as a supplement to the Groundwater and Surface Water <br />Monitoring Plan. <br />The overall objective of the sampling program is to obtain samples which accurately depict <br />the chemical, physical, and/or biological conditions of groundwater and surface water at the site. <br />Extraneous materials can be introduced into the sample medium during the sampling program (e.g., <br />by bailing or pumping of groundwater with equipment previously used at another sampling site). <br />• Trace quantities of these materials can thus be captured in a sample and lead to False positive <br />analytical results and, ultimately, to an incorrect assessment of conditions associated with the site. <br />Decontamination ofnon-dedicated sampling equipment (e.g., bailers, pumps, and other equipment) <br />is therefore required to prevent sampling cross-contamination. <br />D.2 EQUIPMENT <br />The following is a list of equipment that may be needed to perform decontamination: <br />Plastic brushes <br />Stainless steel wash tubs or 5-gallon buckets <br />~ Plastic scrapers <br />Sponges or paper towels <br />Laboratory-grade, nonphosphate detergent (low sudsing) (e.g. Alconox, Liquinox) <br />Potable water <br />Distilled water, including laboratory-grade distilled water <br />• ~ Spray bottles or garden-type water sprayers <br />Clean plastic sheeting and/or trash bags <br />Agapito Associates, Inc. <br /> <br />