PERMFILE139611

• Permit No: M1988112
• IBM Index Class Name: Permit File
• Doc Date: 11/8/1988
• Section_Exhibit Name: APPENDIX P EMERGENCY RESPONSE PLAN
• Media Type: D
• Archive: No

' 7.2 Oil and Coolant
' IN THE EVENT OF AN ACCIDENT, SPILL OR LEAK, THE FOLLOWING STEPS
ARE TO BE FOLLOWED:
'
1. Attempt to stop or contain the flow of material.
2. In the case of an accident, administer first aid and
' medical treatment.
3. Notify immediate supervisor or the Safety and Training
' Supervisor. Supervisors are to report directly and
without delay to the Mine Superintendent or acting Duty
t Officer. The Mine Superintendent will 1:ake further
corrective action.
4. Begin clean-up activities promptly. Spilled material
should be pumped into approved containers. If pumping
is not possible, sand, dirt, or absorbent material should
h
l
l
l
b
be p
aced to absorb t
e oi
or coo
ant. Once a
sorption
is complete, all contaminated material should be
collected in barrels and disposed in a manner and at a
location specifically approved by the Mine
Superintendent.
' 7.3 Mill Processing Reagents
' IN THE EVENT OF AN ACCIDENT, SPILL OR LEAX, THE FOLLOWING STEPS
ARE TO BE FOLLOWED:
t If a worker is unfamiliar with the mill process or mill
reagents and discovers an accident, leak or spill, he should not
' attempt to follow the steps below, but rather should immediately
notify his supervisor, the Safety and Training Supervisor or the Mill
' Supervisor.
' Note: All mill processing reagents are located within the mill
building except cyanide Flo-Bins. The mill building has been designed
for containment and collection of any spills.
1
' -10-