PERMFILE138305

• Permit No: C1981071
• IBM Index Class Name: Permit File
• Doc Date: 12/11/2001
• Section_Exhibit Name: RN EXHIBIT 1 TO EXHIBIT 8
• Media Type: D
• Archive: No

u
PART I
Page le of 19
Permit No.: CO--0027154
A. TERMS AND CONDITIONS (Continued)
4. Effluent Limitations for Outfall 007
Beginning immediately and lasting through June 30, 1991 the permittee is
authorized to discharge within the limitations specified below, from outfall(s)
serial number(s) 007.
Effluent Parameter
~J
Flow - (MGD)
Total Suspended Solids (mg/1)
Total Recoverable Copper (mg/1)
Total Recoverable Manganese (mg/1)
Total Recoverable Zinc (mg/L)
Total Recoverable Iron (mg/1)
Electrical Conductivity, micromhos/cm
Discharge Limitations
Mazimum Concentration
30~ay avg. a/ Daily Max. c/
Report Report
35 70
0.022 0.044
Report Report
0.05 0.10
1.0 2.0
5150 Report
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
031 and grease shall not exceed 10 mg/1 c/ in any grab sample nor shall there be a
visible sheen.
Any discharge or increase in the volume of a discharge caused by precipitation
within any 24-hour period less than or equal to the l0year, 24-hour
precipitation event (or snowmelt of equivalent volume may comply with the
following limitations subject to burden of proof requirements described in Part
I.A.7.
Effluent Parameter Discharge Limitations
Mazimum Concentration
30-day avg. a/ Daily Max. c/
Flow - (MGD) Report Report
Total Recoverable Copper (mg/1) 0.022 0.044
Total Recoverable Manganese (mg/1) Report Report
Total Recoverable Zinc (mg/1) 0.05 0.10
Total Recoverable Iron (mg/1) 1.0 2.0
Electrical Conductivity, micromhos/cm 5150 Report
Settleable Solids (ml/1) N/A 0.5
pH - (Standard Units) shall remain between 6.5 and 9.0 c/.
011 and grease shall ^ot exceed 10 mg/1 c/ in any grab sample nor shall there
be a visible sheen.
See part I.C. for Footnotes Amended 03/19/87
• Code: i - 8 Date: 9 - 84 Amended 12 21 88
d
"'
Amen
ed 8/28/90 Effective °
_