PERMFILE136492 - Laserfiche WebLink

Home Browse Search

-~- operation: backfilling, grading, topsoil application, seeding, mulching, fertilization, and labor to complete reclamation. Determine and specify the point during the operation when the site has reached a point of maximum disturbance. The cost to reclaim the site to the specifications of the Reclamation Plan at this point must be estimated. Unit costs (cost per cubic yard), volumes, haul or push distances, and grades must be included when backfilling and grading is part of the Reclamation Plan. Volume and unit costs for finish grading, subsoil and topsoil application must be provided in terms of cost per cubic yard. The estimated cost for fertilizer, seed and mulch acquisition and application must be provided as cost per acre. (2) Equipment costs must include such factors as equipment operator wages and benefits, fuel and lubricant consumption and depreciation. The cost to mobilize and demobilize the equipment from the nearest population center should be estimated. (3) All items referenced in the Reclamation Plan must be included in the cost calculation. These items in addition to earthwork, such as detoxification, building demolition, fencing, monitoring well sealing or stream channel reconstruction must also be included in the reclamation cost estimate. (4) After the direct costs noted above have been estimated, the Office may add up to an additional maximum eighteen and one-half (L8.5%) percent of that total, which includes private contract, typical overhead costs. This additional cost is required to cover indirect costs that an independent contractor would incur when performing reclamation of the site. Five (5%) percent additional cost shall be added to cover Office administration cost in the event of bond forfeiture and permit revocation. EXIIIBIT E -Mao (Rule 6.3.51: (1) In addition to the requirements of 6.2.1(2), you must provide a map that clearly describes the features associated with the mining plan and the components of the Reclamation Plan. Include one map for the mine plan and one map for the Reclamation Plan. The map(s) must be drawn to a scale no smaller than appropriate to clearly show all elements that are required to be delineated by the Act and these Rules; show a north arrow, note any section comers adjacent to the proposed operation, and indicate the date illustrated. At a minimum, maps must include the following information: (2) Minint=_ Plan Maa (a) outline and label the permit boundaries, described in Exhibit A -Legal Description; for all Limited [mpact 110 and Special l l l Operations, the Office considers the area bounded by the permit boundary to be analogous to the affected area; (b) label the names of owner(s) of record of the surface of the affected area, of the land within two hundred (200) feet of the affected area, identify the owner of the substance to be mined, and the type of structure and owners of record of any permanent or man-made structures within 200 feet of the affected area; (c) outline and label all major surface features to be used in connection with the proposed operation such as: existing and proposed roads, pit boundary, topsoil stockpiles, overburden stockpiles, product stockpiles, waste rock fills, stream channels, buildings, processing plant, underground openings such as adits or ventilation facilities, ponds, impoundments, dewatering pumps, diversions, tail or waste disposal areas;