PERMFILE134374

• Permit No: C1982056
• IBM Index Class Name: Permit File
• Doc Date: 12/11/2001
• Section_Exhibit Name: 2.10 Maps and Plans
• Media Type: D
• Archive: No

SlE= ~o/. _
.10 MAPS AND PLANS
• Rule 2.10.1 -General Requirements
~oc D~ ~Z/JJ~o~
999
Maps submitted with applications shall be presented in a consolidated format and shall legibly detail all of
the information set forth on topographic maps of the U. S. Geological Survey of the I :24,000 scale series.
(I) Maps of the permit area shall be a[ a scale of 1:6,000 or larger, if requested by [he Division or by
the operator with the approval of the Division.
(2) Maps of the remainder of the area to be affected over the estimated life of the operations and the
adiacent areas shall clearly show the lands and waters within [hose areas and be at a scale determined by the
Division, which in no case shall be smaller than 1:24,000 unless approved by the Division.
(3) All maps shall show th~ermi[ area boundaries.
RESPONSE
All maps submitted with this permit revision application legibly detail all the information set forth on
topographic maps of the U.S. Geological Survey of the 1:24,000 scale series. The maps of the permit area
and adjacent areas clearly show the lands and waters within these areas. All maps show the permit area
boundary.
During a telephone conference held on July 24, 1984 between Ed Bishoff and Larry Damrau, i[ was
• determined maps with the scale of I :12,000 adequately represent the depicted items within the permit area
and as such, are acceptable for approval in accordance with Rule 2.10.1(2).
Rule 2.10.2 -permit and Adjacent Areas
One nth and plan submitted with the application shall distineuish among each of the phases during
which surface coal mining operations were or will be conducted at any place within the permit area and adiacent
area. At a minimum, distinctions shall be clearly shown amone those portions of [he permit area and adiacent
areas in which surface coal mining operations occurred:
(I) Prior to AUQmst 3, 1977;
(2) After August 3, 1977, and prior [o either:
(a) Mav 3, 1978, or
(b) In the case of an applicant or permittee which obtained a small operator's exemption in
accordance with [he interim Federal regulatory pro¢ram, January I. 1979:
(3) After Mav 3, 1978 (or January I, 1979, for persons who received a small operator's exemption)
and prlOr [O Ilte appfOVal Of the 3pp11Cah1e regUlatOrV Program: amd
(4) After the estimated date of issuance of a permit by the Division.

MR 97-154 2.10-I Revised 9/10/97