My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE128001
DRMS
>
Back File Migration
>
Permit File
>
300000
>
PERMFILE128001
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 10:25:08 PM
Creation date
11/25/2007 5:29:39 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1990143
IBM Index Class Name
Permit File
Doc Date
12/4/1990
From
DEPT OF THE ARMY
To
MLRD
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
12
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
_ f _,~ ~ ~ <br />7) Upon completion of seeding, the seeded area should be <br />`'covered with weed-free grass hay, cereal grain straw or similar mulch <br />material at the rate of approximately two (2) tons per acre. At <br />least half of the straw material should be 10 inches or greater in <br />length; fine materials should be avoided. Well-cured feedlot or <br />barnyard manure may also be used as a combination mulch/organic <br />matter and nutrient source for the seeded area. Recommended <br />application rate is approximately 20 tons per acre, spread uniformly <br />over the area. Repeated applications of manure for fertilization <br />effect are not recommended, due to potential salt accumulation, <br />Mulches will provide a more humid environment for seeding <br />establishment, will help catch and conserve soil moisture, promote <br />warmer soil temperatures in spring and fall, and protect newly <br />germinated seedlings from wind and water erosion. "Hydro-mulchers" <br />are commercially available which often expedite the mulching process <br />on steeper slopes; contact the SCS office in regard to their use and <br />availability. <br />The mulch material should be stabilized and anchored by means of <br />commercially available synthetic or jute netting (particularly on <br />slopes steeper than 3:1), or mechanically through the use of a heavy <br />disk implement will dull, parallel disk blades, in order to crimp the <br />mulch into the soil 2 to 3 inches deep. Crimping should not sever <br />the mulch. Mulching with straw should not be done when wind <br />velocities are high. Mulching should be maintained on the seeded <br />area for at least through the first full growing season. <br />8) The seeded area should be deferred from all machinery <br />traffic for at_least until the end of the second full growing season, <br />or until a reasonably good stand is established (possibly 3-4 years). <br />Fertilizer application during the first few growing seasons, based <br />preferably upon soil test findings, is recommended to provide optimum <br />growth conditions. <br />9) In addition to the above recommendations, also refer to the <br />following, enclosed documents for additional information and <br />guidelines: <br />- Colorado SCS Spec. No. 544 - "Land Reconstruction, <br />Currentl y Mined Land" <br />- Colorado SCS Spec. No. 484 - "Mulching" <br />- Colorado SCS Spec. No. 342 - "Critical Area Planting" <br />- Colorado SCS Spec. No. 572 - "Spoilbank Spreading" <br />- SCS Job Sheet - "Mulching for Erosion Control on Newly <br />Shaped Slopes" <br />- Colorado Range Note No. 25 - "Seeding Recommendations" <br />- Colorado Plant Materials Tech . Note No. 51 - "Colorado <br />Laws and Regulations Relating to the Sale of Agricultural <br />Seed and Seed Certification" <br />- Area 4 T echnical Note - "Gras s Seed Drill Use and <br />Calibrat ion" <br />- Land Use Evaluation Sheet <br />
The URL can be used to link to this page
Your browser does not support the video tag.