Laserfiche WebLink
PARTI <br />Page No. 33 <br />. Permit No.: CO-0000221 <br />vi. Mining operations include facilities classified as Standard Industrial Classification Codes 10 through 14 (mineral <br />industry), including active or inactive mining activities. This definition includes operations that have temporarily <br />ceased mining and are in "temporary cessation" status with the Colorado Division of Minerals and Geology. <br />vii. Inactive mining operations are mining operations that are no[ being actively mined. <br />viii. Mitre waste, for the purposes of this permit, means any mineral material such as overburden, raw materials, <br />intermediate products, byproducts, finished products or waste products, which is or has been mechanically disturbed <br />or moved from its naturally occurring location as part of a mineral extraction (mining) activity. Examples of mine <br />waste include: mine tailings, which is ore that has gone through a milling process and then been discarded, and waste <br />rock, which is rock that has been moved from its natural location, but not processed. <br />F... GENERAL MONITORING, SAMPLING AND REPORTING REQUIREMENTS <br />1. Routine Reporting of Data <br />Reporting of the data gathered in compliance with Part I.B.1 shall be on a quarterly basis. Reporting of all data gathered <br />shall comply with the requirements of Part I. E. (General Requirements). Monitoring results shall be summarized for each <br />month and reported on Division appcaved discharge monitoring report (D1V1R) forms (EPA form 3320-1). The forms shall be <br />mailed to the address listed below so they are received no later than the 28th day of the following month. If no discharge <br />occurs during the reporting period, "No Discharge" shall be reported. <br />The DMR forms consist of four pages - [he top "original" copy, and three attached no-cazbon-required copies. After the <br />DMR form has been filled out and signed, the four copies must be separated and distributed as Follows: <br />• The first original signed copy of each discharge monitoring report (DMR) shall be submitted to the Division at the following <br />address: <br />Colorado Department of Public Health and Environment <br />Water Quality Control Division <br />WQCD-P-B2 <br />4300 Cherry Creek Drive South <br />Denver, Colorado 80246-1530 <br />The remaining copies are for the pemtittee records. The Discharge Monitoring Report forms shall be filled out accurately and <br />completely in accordance with requirements of [his permit and the instructions on the forms. They shall be signed by an <br />authorized person as identified in Part LE.6. <br />Calculations for al] limitations which require the averaging of measurements shall utilize an arithmetic mean unless otherwise <br />specified by the Division in the permit <br />2. Representative Sampling <br />Samples and eneasuremen[s taken as required herein shall be representative of the volume and nature of the monitored <br />discharge. All samples shall be taken at the monitoring points specified in this permit and, unless otherwise specified, before <br />the efEluentjoins or is diluted by any other wastestream, body of water, or substance. Monitoring points shall not be changed <br />without notification to and approval by the Division. <br />If the pennittee monitors at the point of discharge any pollutant limited by [he permit more frequently than required by the <br />perntit, using approved test procedures or as specified in the permit, the result of this monitoring shall be included in the <br />calculation and reporting of data to the Division. <br />3. Analytical and Sampling Methods for Monitoring <br />The pennittee shall install, calibrate, use and maintain monitoring methods and equipment, including biological and indicated <br />pollutant monitoring methods. All sampling shalt be performed by the permittee according to specified methods in 40 CFR <br />Part 136; methods approved by EPA pursuant to 40 CFR Part 136; or methods approved by the Division, in the absence of a <br />method specified in or approved pursuant to 40 CFR Part 136. The analytical method selected for u parameter shall be <br />the une that can measure the lowest detected limit fur that parameter nnless the permit limitatimt or stream standard <br />