My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE123608
DRMS
>
Back File Migration
>
Permit File
>
300000
>
PERMFILE123608
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 10:21:20 PM
Creation date
11/25/2007 11:43:26 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1999002
IBM Index Class Name
Permit File
Doc Date
4/26/1999
Doc Name
PREMLINIARY RESPONSE PLAN
Section_Exhibit Name
APPENDIX G WELL FIELD SPILL PLAN
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
7
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
• <br />• <br />down. Shutdown may include all operations at the Piceance Site, depending on the <br />nature of the failure. If the instrumentation is not in good working order, the <br />operator would notify the Ptant Maintenance Manager and instrumentation repair <br />would be coordinated. <br />3. The failed piping segment would be isolated from the remainder of the well field <br />piping system by closure of valves and shut down of pumps. A visual inspection <br />would be performed on the piping segment to determine the location of the leak. <br />4. Containment and cleanup of spilled materials would occur as described below. <br />5. The failed piping segment would be repaired and tested as appropriate. The piping <br />segment would then be placed back into service. <br />If a small release of sodium solutions occurs on a permeable surface (such as soil) the <br />material would be immediately shoveled onto plastic sheeting (and subsequently <br />covered with plastic sheeting to prevent contact with surface runoff) or into 55-gallon <br />drums. Shoveling will cease after either a visual check, a pH measurement, or another <br />analytical method confirmed that the spilled material had been recovered. The spilled <br />material would then be either recycled or disposed, depending on the characteristics of <br />the material. <br />If a small release occurs on an impermeable surface (such as concrete or asphalt), the <br />material would be absorbed by absorbent pads, booms, or other related material. <br />Absorbing efforts would be cease when a visual inspection confirmed that the spill had <br />been recovered. The absorbents would then be containerized and disposed properly. <br />if a large release of sodium solution occurs, the material would be recovered by use of a <br />vacuum truck. Vacuum efforts would cease after a visual inspection confirmed <br />recovery of spilled material. All materials recovered would be sampled and analyzed <br />to determine whether the material would be recycled or disposed. <br />American Soda will have a vacuum truck situated at both the Piceance and Parachute <br />Sites. Each truck will have a capacity of 3,200 gallons (or 10 tons of soda ash). The <br />vacuum trucks will only be used to recover sodium bicarbonate and/or sodium <br />carbonate materials or they will be appropriately decontaminated between uses for <br />different materials. They will not be used to recover diesel fuel or unleaded gasoline <br />spills. <br />Recycling is the preferred alternative for spilled material and would occur through use <br />of existing on-site processes. Disposal would occur only if the sodium bicarbonate or <br />sodium carbonate could not be feasibly recovered and the disposal method would be <br />determined after appropriate sampling and characterization. A potential disposal <br />location would be an off-site landfill; however, other disposal methods will be <br />Preliminary Response Plan <br />Yankee Gukh Sodium Minerals Project <br />American Soda, L. L.P, <br />5 <br />
The URL can be used to link to this page
Your browser does not support the video tag.