PERMFILE122276 - Laserfiche WebLink

Home Browse Search

ROADABLE EQUIPMENT: -_-___---______ Total Eqp. Machine Descri pt~on Cost/hr Fleet Size Haul Trip (no. hauled) Cost/hr sheet 2 of 2 Return Trip Cost/hr Flatbed Truck 348.24 1 f48. 24 548.24 Welding Truck 556.10 1 556.10 (56.30 MOB/DEMOB SUPPORT EQUIPMENT: -------------------------- Non~Roadable Eqp. Description Weight Ownership Haul Rig (tons) Cost/hr Cost/hr Subtotals 5104.34 Fleet Size Haul Trip (no. hauled) Cost/hr 5104.34 Return Trip DOT Permit Cost/hr Cost/ea Roadable Eqp. Description Total Eqp. Cost/hr Subtotals Fleet Size (no. hauled) 50.00 10.00 Haul Trip Return Trip Cost/hr Cos:/hr Subtotals 50.00 :0.00 EQUIPMENT HAUL DISTANCE 8 TIME Neare st major city or town within p roject area region: Durango ---------------- --------- ---- Total one way travel distance = 10 .0 miles. Average travel speed = 50.00 mph. Job Time - Non Roadable Equip. = 0. 50 hours load Roadable Equip.= N/A hours load 0. 20 hours haul 0.20 hours hau~ 0. 50 hours unload N/A hours unload 0. 20 hours return 0.20 hours return JOB COST Total Hob/Demob Cost = f762.52 f0.00 NOTE: Non~roadable equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip consisting of a one~way loaded haul and a one~way empty return. Roadable equipment (no haul rig required) costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain specified road segments within the State. Separate permits are required for each rig on each loaded trip. Additionally. pilot cars (one or two per rig depending on degree of oversize) are also required for oversize equipment hauling, and loading/unloading times must be increased substantially for equipment which must be partially dismantled for transport and re assembled at the job site. Costs for lifting equipment and other support equipment needed for this work should be included in the mob/demob costs.