PERMFILE120568

• Permit No: C1996083
• IBM Index Class Name: Permit File
• Doc Date: 8/22/2003
• Doc Name: Section 10
• Section_Exhibit Name: Volume VII Geotechnical Studies
• Media Type: D
• Archive: No

M03107GE
~J
•
TABLE OF CONTENTS
1.0 INTRODUCTION Page 1
1.1 Proposed Construction 1
1.2 Scope of Services 1
2.0 SITE CHARACTERISTICS 2
2.1 Site Location 2
2.2 Site Conditions 3
2.3 Subsurface Conditions 3
3.0 CUT AND FILL SLOPE STABILITY CONSIDERAT IONS 4
4.0 FILL CONSTRUCTION CONSIDERATIONS 6
5.0 ON-SITE DEVELOPMENT CONSIDERATIONS 7
6.0 FOUNDATION RECOMMENDATIONS 8
6.1 Spread Footings and Mat Foundations 8
6.1.1 Spread Footings 9
6.1.2 Mat Foundations 14
7.0 INTERIOR FLOOR SLAB DISCUSSION 15
8.0 COMPACTED STRUCTURAL FILL 18
9.0 LATERAL EARTH PRESSURES 19
10.0 BACKFILL 19
11.0 SURFACE DRAINAGE 20
12.0 LANDSCAPE IRRIGATION 21
13.0 SOIL CORROSIVITY TO CONCRETE 21
14.0 RADON CONSIDERATIONS 21
15.0 POST DESIGN CONSIDERATIONS 21
15.1 Structural Fill Quality 22
15.2 Concrete Quality 23
16.0 LIMITATIONS 23
NATSRIALS TESTING CONCEPT
ASFE PUBLICATION
PROJECT VICINITY MAP Figure 1
TEST BORING LOCATION SKETCH 2
SLOPE STABILITY ANALYSIS Figures 3 - 6
KEY AND BENCH CONCEPT Figure 7
DRAIN SYSTEM CONCEPT 7
CONCEPTUAL SKETCH OF FOOTING SUBGRADE TREATMENT 8
EMBEDMENT CONCEPT 9
FIELD STUDY Appendix A
KEY TO LOG OF TEST BORING Figure Al
LOG OF TEST BORINGS Figures A2 - AS
LABORATORY STUDY Appendix B
SWELL-CONSOLIDATION TESTS Figures B1 - BS
GENERAL GEOTECHNICAL ENGINEERING
CONSIDERATIONS Appendix C
RADON FLOW CONCEPT Figure C1
•