PERMFILE120495

• Permit No: C1980007
• IBM Index Class Name: Permit File
• Doc Date: 12/11/2001
• Section_Exhibit Name: EXHIBIT 08 Spill Prevention, Control & Countermeasure Plan
• Media Type: D
• Archive: No

Page lc of 19
Per.¢it tto. CC-0038776
.:> A. T~tSS At(D CONDITIOtlS (continued)
i•
5. Effluent Limitations (Oucfalls 002, 004, 005, 006, 008, 009 and 010)
Any discharge or increase is the volume of a discharge caused by
precipitation within nay 24-hour period less than or equal to the
10- eat, 24-hour precipitation event (or snowmelt of equivalent
volume may comply with the following limitations subject to burden of
proof requirements described Sn Part I.A.B.
Effluent Parameter
Flow, MCD
Settleable Solids, mg/1 ]/
I::31 Dissolved Solids, mg71
Total Recoverable Copper, mg/1'
Outfall 00? only
Discharge Limitations
30-Day Avg Da11y Max c/
N/~ Report
N/P_ 0.5
N/:1 Reparc
N/?. Report
pH - standard units shall remain between 6.S and 9.0 c/.
Oil and Grease shall not exceed IO mg/I el in any grab sample no: shall there
be a visible sheen; see footnote f/.
6. :fluent Limitations (Outfal.is 002, 004, 005, 006, 008, 009 and 010)
l,• Any discharge or increase in the volume of a discharge caused by
precipitation within any 24-hour period rester than the 10-year,
24-hour precipitation event (or snowmelt of equivalent volume may
comply with toe following limitations subject to burden of proof
requirements described in Part I.A.B.
Flow, HCD - monitoring only per Part I.B.1.
To cal Dissolved Solids, mg/1 - monitoring only per Part I.B.1.
p8 shall remain between 6.5 and 9.0 standard units c/.
Oil and grease shall not exceed 10 mg/1 c/ in any grab sample nor shall there
be a visible sheen.
" Hcnltaring requited only ~.ien cooper sulfate is used.
t
See part I.C. for Footnotes. ~
I
Cade: i - 2 Dace: 1-84, revised 12-97, revised 12-83
~,.
I