Laserfiche WebLink
. Other Facility Relocations <br />In addition to the roads described above, power lines and phone lines also need to be relocated <br />and replaced after mining. Generally, these lines parallel the roads and are relocated and <br />restored with them. All restored phone and power lines will be buried. WFC has been working <br />with San Miguel Power Co. and Nucla Naturita Telephone Company regarding the relocations <br />and replacements. The plans for all relocations and restorations have been agreed and will be <br />designed, contracted and installed by both utility companies. WFC will reimburse the utilities for <br />the cost of the work. <br />Special Features -Pit Turn Slot Cut- Amendment Area <br />In 1998, WFC permitted a slot cut immediately south of BB Road in order to provide room to turn <br />the pit to the north in preparation to mine through BB Road. This slot cut is 115 foot wide by 1,700 <br />foot long as shown on Exhibit 2.05.2-3 for location. A slot cut of similar width is also needed on <br />the east side of 2700 Road as mining proceeds north to the outcrop from the year 2000-2003. <br />Exhibit 2.05.2-3 has been modified to show the slot. The slot will begin approximately 630 feet <br />south of the intersection of BB Road and 2700 Road and will extend north of the intersection to <br />near the Reeder Garret property. The total length of the slot cut is 1550 feet. This open "turn" slot <br />• is necessary to allow for a safe truck-shovel working area and for the overburden push dozers) <br />to dump their spoil off the coal edge when the mining operation first turns and advances <br />northward. Exhibit 2.05.2-4 shows a typical cross section of the Pit Turn Slot Cui and volumetric <br />are listed. WFC plans on making up the deficit backfill volume this cut will create when it mines <br />west of 2700 Road in the amendment area and the overburden depth increases. WFC will <br />increase the reclamation bond liability this slot will create. Please see Section 3.02.2-1 for <br />details. <br /> <br />(Revised 12/00) Attachment 2.05.3(3) -10-108 <br />