Laserfiche WebLink
HOURLY PRODUCTI~ ~~ ~~ sheet 2 of 2~~~ <br />Hauling Capacity <br />Basis <br />Material weight : 2,550 pounds/LCY <br />Material description <br />Earth -Dry packed <br />Rated payload : 75,000 pounds <br />rer Bowl (volume) Basis <br />Struck volume : 21.00 LCY <br />Heaped volume : 31.00 LCY <br />Average volume : 26.00 LCY <br />Adjusted rapacity : 26.00 LCY *" <br />Payload capacity : 29.41 LCY "' howdy production reflects volume per scraper pair on push-pull models <br />Cvcle Time : Jab Condition Corrections : Site altitude (ft.) : 6,300 <br /> Scraper Push dozer Source <br />Scraper loading time * : 1.00 minutes Altitude adj.: 1.000 NA (Cat HB) <br />Maneuver and spread time : 0.60 minutes Job efficiency : 0.830 NA (Cat HBJ <br />' loatl time per scraper pair on push-pull models Net COrreCtlOn : 0.830 NA <br />Travel time <br />Road condition description :Rutted diR, little maintenance, no water, 1"tire <br />Haul Route <br />Seg. # Haul distance (feet) Grade (%) Roll. res. (%) Total res. (%) Velocity (fpm) Travel time (min.)" <br />1 225 -8.80 4.00 -4.80 2972 0.11 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Haul time : 0.11 minutes <br />Return route <br />fable velocities are max. attainable per total resistance shown, not average <br />Total scraper team cycle time (load + haul + maneuver and spread + return) <br />Unadjusted unit production/hour : 1,610.36 LCY/hour "' Adjusted forjob conditions <br />Optimal number of scrapers per push dozer : NA Selected number of scrapers <br />Adjusted single scraper team (unit) hourly production <br />Adjusted multiple scraper team (fleet) hourly production <br /> <br />minutes <br />1.94 minutes <br />1,336.60 LCY/hour <br />2 scraper(s) <br />1,336.60 LCY/hour <br />1,336.60 LCYlhour <br />"navel time for each segment is adjusted for acceleration/deceleration. Return time : 0.22 <br />