Laserfiche WebLink
• standard prefabricated components and are mounted on structural steel <br />frames. Elevated sections are supported by steel legs anchored by <br />concrete piers. The primary surface conveyors in the mine facility area <br />include the following: <br />0 42" main haulage conveyor extending 550' from the mine portals <br />to the raw coal stockpile <br />0 36" reclaim conveyor extending 400' from the draw point <br />beneath the raw coal stockpile to the coal preparation plant <br />0 36" conveyor extending 450' from the coal preparation plant <br />to the clean coal stockpile <br />o Two segments of 36" belt totalling 150 feet extending from the <br />raw coal reclaim conveyor to the rotary breaker and from the <br />• preparation plant to the fine refuse storage bin <br />All surface conveyor belts, drives and transfer points are partially <br />enclosed by prefabricated cover structures or totally enclosed by either <br />underground installations or prefabricated metal buildings. Locations of <br />all surface conveyor belts are shown on the Mine Surface Facilities Map, <br />(Map 18j. <br />EFCI depends on conveyor belts as a crucial link between the mine and coal <br />preparation plant. Consequently, an ongoing maintenance and inspection <br />program has been developed and implemented to ensure continued safe and <br />efficient operation of all conveyors. This program includes regular <br />inspection of belts, belt support structures and all drive components, <br />regular lubrication of drive components, clean-up as necessary in belt <br />transfer areas, and periodic replacement under a preventative maintenance <br />program of critical conveyor components. <br />• Upon completion of mining, conveyor components will be disassembled and <br />salvaged. Any structural components which cannot be salvaged will be <br />demolished, disposed of in a designated disposal area, and covered with <br />backfill. <br />2.05.3-26 <br />