|
:,<7-;.n
<br />SPECIMEN LABEL UPDATES AVATLABLE AT WWW.GREENBOOK.NET 4
<br />crops(s) grown in the zest strips. In the case of suspccud offsite movemrnt of
<br />LANDMARKTM MP to cropland, soil samples should be quantitatively analyzed
<br />for LANDMARKTM MP or any other herbicide which could be having an adverse
<br />effect on the crop, in addition to conducting the about-described bioassay.
<br />Do not use this product in the following counties of Colorado:, Saguache, Rio
<br />Grande, Alamosa, Costille and Conejos.
<br />SPRAY DRIFT MANAGEMENT
<br />The inumction of many equipment and weather-related factors determines the
<br />potential for spiny drift The applicaur is responsible for considering all these
<br />facmrs when making application decisions.
<br />AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPL]CA-
<br />TOR.
<br />IMPORTANCE OF DROPLET SIZE
<br />The most effective way to reduce drift poundal is u apply large droplets (> 150-
<br />200 microns). The best drift management strategy is u apply the largest dropkta
<br />that provide sufficient coverage and control. The presrnce of unsitive species
<br />nearby, the environmental conditions, and pest pressure may affect how an ap-
<br />plicamr balances drift contra] and coverage. APPLYING LARGER DROPLETS
<br />REDUCES DRIFT' POTENTIAL, BUT WILL NOT PREVEFIT DRIFT' IF AP-
<br />PLICATIONS ARE MADE IMPROPERLY OR UNDER UNFAVORABLE EN-
<br />VIRONMENTAL CONDITIONS! See Wind, Temperature end Humidity, and
<br />Surface Temperamre Imversions sections of this label.
<br />Controlling Drople7 Size-0eneral Techniques
<br />• VolumtiUse high flow rate nozzles to apply the highest practical spiny vol-
<br />ume. Nozzles with higher rated flows produce larger droplets.
<br />• Pressure-Use the Tower spiny pressures recommended for the nozzle. Higher
<br />pressure reduces droplet size and does mot improve canopy prnetmtion. WHEN
<br />HIGHER FLOW RATES ARE NEEDED, USE AHIGHER-CAPACITY NOZ.
<br />ZLE WSTEAD OF WCREASING PRESSURE.
<br />• Nozzle Type-Use a nozzle type that is designed for the intended application.
<br />With most nozzle types, narrower spiny anglesproducelarger droplets. Consider
<br />using low-drift nozzles.
<br />CantrolGng Drople7 Size-Airtrafr (Helicopter)
<br />Number of Nozzles-Use the minimum number of nozzles with the highest flow
<br />mu that provides uniform coverage.
<br />Nozzle Orientation-0ricnting nozzles so that the spray is emitted backwards,
<br />parallel to the aus[rcam, will produce largtt droplets than other orientations.
<br />Nozzle Type-Solid stream nozzles (such as disc and core with swirl plak
<br />removed) oriented straight back produce larger droplets than other nozzle types.
<br />Beam Length and Height
<br />Boom Length (helicopter)-Use a boom length and position that prevcnta droplets
<br />from enuring the sour vortices.
<br />Boom Height (helicopter}-Application dsom than 10 feet above the canopy
<br />increases the poundal for spray drift
<br />Boom Height (ground)-Setting the boom at the lowest height which provides
<br />uniform coverage reAuces the expomre of droplets to evaporation and wind. The
<br />boom should remain level with [he target and have minimal bounce.
<br />WIND
<br />Drift poundal increases at wind speeds ofless than 3 mph (due m variable direction
<br />and inversion potential) or more than 10 mph. However, many factors, including
<br />droplet size and equipment type determine drill poun[ial at any given wind speed.
<br />AVOID APPL]CATIONS DURING GUSTY OR WINDLESS CONDITIONS.
<br />Note: Local urain can influence wind patterns. Every epplicaror should be
<br />familiar with local wind patterns end how they effect spray drift.
<br />TEMPERATURE AND HUMIDITY
<br />When making applications in hot and dry conditions, setup equipment m produce
<br />larger droplets k seduce effects of evaporation.
<br />SURFACE TEMPERATURE INVERSIONS
<br />Drift potential is high during a surface tempemmue inversion. Surface inversions
<br />restrict vertical air mixing, which rouses small suspended droplets ro remain close
<br />to the ground and move latemlty in a concrntmted cloud. Surface inversions are
<br />characurized by increasing kmpemturc with altitude and arc common on nights
<br />with limiud cloud cover and light to no wind. Thry begin to form as the sun
<br />sets and often continue inro the morning. Thev presence can be indicated by
<br />ground fog; however, if fog is not present inversions can also be identified by
<br />the movement of smoke from a ground sourer or an airemfl smoke genemur.
<br />Smoke that layers and moves lakmlly in a concentraud cloud (under low wind
<br />conditions) indicates a surface inversion, while smoke that moves upward and
<br />rapidly dissipates indicaes good vertical ev mixing.
<br />Do not contaminak wear, food, or feed by smmge or disposal.
<br />PESTICIDE STORAGE: Store product in original container only.
<br />PESTICIDE DISPOSAL: Waste resulting from the use of this product may
<br />be disposed of on size or at an approved wasu disposal facility.
<br />Container Disposal: For Plastic Containers; Triple rinse (or equivalent). Then
<br />offer for recycling or reconditioning, or punetme and dispose of in a sanitary
<br />landfill, or incinemtion, or, if allowed by Stale and local authorities, by buming.
<br />If burned, stay out of smoke. For Fiber Sacks: Complekly empty fiber sack by
<br />landfill or by incinemtion if allowed by Smk and local authorities. For Fiber
<br />Drums With Limers: Compkkly empty liner by shaking end tapping sides and
<br />bonom m loosen clinging particles. Empty residue into application equipment
<br />Ihcn dispose of liner in a sanitary landfill or by incinemtion if allowed by Stau
<br />and local authorities. If dram is contaminated and cannot be reused, dispose o
<br />in the same manner. For Paper and Plastlc Bags: Compleuly empty bag inu
<br />application equipmrnt. Theo dispose of empty bag Sn a sanitary landfill or by
<br />incinemtion, oy if allowed by State and local authorities, by buming. If bumcd,
<br />stay out of smoke.
<br />LIMITATION OF WARRANTY AND LIABILITY
<br />NOTICE: Read This Limitation of Waranty and Liability Before Buying of
<br />Using This Product, If dre Terms Are Not Acceptable, Return the Product a~~
<br />Once, Unopened, and the Purohase Price Will Be Refunded.
<br />It is impossible to eliminak all risks associaud with the use of dtis product
<br />Such risks arise from weather conditions, soil facmrs, off target movement
<br />unconventional farming kchniques, presence of other maurials, the manner o1
<br />use or application, or other unknown facmrs, all of which are beyond the contra;
<br />of DuPont Thcsc risks can cause: ineffectiveness of [he product; mop injury,
<br />or, injury to non-target crops or plants.
<br />DuPont does not agree to be an insurer of these risks. WHEN YOU BUY OR
<br />USE THIS PRODUCT, YOU AGREE TO ACCEPT THESE RISKS.
<br />DuPont warrants that this product conforms m the chemical description on the
<br />label thereof and is reasonably fit for the purpose stated in the Directions foi
<br />Usc, subjcm u the inherent risks described above, when used in accordance with
<br />the Directions for Uu under normal conditions.
<br />DUPON7 MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF
<br />FTINESS OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR
<br />MIPLIED WARRANTY.
<br />IN NO EVENT SHALL DUPONT OR SELLER BE LIABLE FOR ANY INCI-
<br />DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTTNG FROM
<br />THE USE OR HANDLING OF THIS PRODUCT. BUYER'S OR USER'S
<br />BARGAINED-FOR EXPECTATION 1S CROP PROTECTION. THE EXCLU-
<br />SIVE REMEDY OF THE USER OR BUYER AND THE EXCLllSTVE LW-
<br />BILITY OF DUPONT OR SELLER, FOR ANY AND ALL CLAIMS, LOSSES,
<br />INJURIES OR DAMAGES (INCLUDWG CLAIMS BASED ON BREACH OF
<br />WARRANTY OR CONTRACT, NEGLIGENCE, TORT OR STRICT LIABIL-
<br />ITY), WHETHER FROM FAILURE 70 PERFORM OR INJURY TO CROPS
<br />OR OTHER PLANTS, AND RESULTING FROM THE USE OR HANDLNG
<br />OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE
<br />OF THE PRODUCT, OR A7 THE ELECTION OF DUPONIT OR SELLER,
<br />THE REPLACEMENT OF THE PRODUCE.
<br />DuPont or its Ag Retailer must have prompt notice of any claim so that an
<br />immediate inspection of buyer's or user's growing crops can be made. Buyer
<br />and all users shall promptly notify DuPont or a DuPont Ag Retailer of any claims,
<br />whether based on contmc; negligrnce, strict liability, other tort or otherwise or
<br />be baited from any remedy.
<br />This Limitation of Waranty and Liability may not be amended by any oral or
<br />NOTICE TO BUYER: Purohese of this makrial does not confer any rights under
<br />patents of countries outside of the United Staus.
<br />The DuPont Oval Logo, DuPOntTM, LANDMARKTM, HYVAR°, KARMEX° and
<br />KROVAR° are badcmarks or registttcd ttadematks of E.I. duPont de Nemours
<br />and Company.
<br />SL-935 O] 1304 04-07-04
<br />H--64677
<br />For product information call: 1.888.6-DUPON7
<br />lnkmtt address: http9/cropprouution.dupontcoM
<br />® 2002-2004 E. I. du Pont de Nemours and Company, Wilmington, Delaware
<br />19898. VID 5.19.04
<br />~~.
<br />rights reserved.
<br />
|