Laserfiche WebLink
• (i) (A) Location; <br />(B) Plans of the structure rhich describe its <br />current condition; <br />standards of Rule 4 or is eligible for exemption frae the design requirements <br />as set forth in 2.07.6. <br />(ii) A compliance plan for each existing structure that is <br />proposed to be modified or reconstructed for use in connection with or to <br />facilitate the surface coal mining and reclamation operation. The compliance <br />plan shall include: <br />ion of the structure to <br />(C) Provisions for monitoring the structure during and <br />after modification or reconstruction to ensure that the performance standards <br />of these Rules are met; and <br />(D) A showing that the risk of fiarn~ to the environment or <br />to public health or safety is not significant during the period of <br />modification or reconstruction. <br />c) A description of each road, conveyor. or rail system to be <br />constructed, used, or maintained within the proposed permit area. The <br />description shall include a map prepared in accordance with 2.10, <br />appropriate cross-sections, and the following: <br />~i) Specifications for each road ridth, road gradient, <br />road surface, road cut, fill embankment, culvert, bridge, drainage ditch, and <br />drainage structure. <br />(ii) A report of appropriate geotechnical analysis, where <br />approval of the Division is required for alternative specifications, or for <br />steep cut slopes under b.03.1(1)(e), 4.03.1(3)(c), 4.03.2(1)(e), or <br />4.03.2(3)(c). <br />(iii) A description of measures to be taken by the <br />applicant for alteration or relocation of a natural drainageway under <br />4.03.1(4)(a)(i) 4.03.2(4)(a)(i), or 4.03.3 4 d . <br />(iv) A description of measures, other than use of a rock <br />headwall to be taken to protect Lhe inlet end of a ditch relief culvert for <br />• approval by the Division under 4.03.1(4)(e)(vi)(E) or 4.03.2(4)(e)(v)(E). <br />-31- Revised 12/22!86 <br />