PERMFILE103529 - Laserfiche WebLink

Home Browse Search

Exhibit A m Attached m end made a pert of that certain Agrcement to Minc Within 200 Feet of a Men•Made Smcture made between Asphalt Paving Company, end Kerr-McGee Gath<ring LLC General Guidelines for Design and Construction Activities On or Near Kerr-McGee Gathering LLC and Kerr -McGee Rocky Mountain Corporation Pipelines and Related Facilities This list of design, construction ono centractor requirements, including but not limited to the following, is for the design and installation of foreign utilities or improvements on Kerr McGee GaUering LLC (KMG) ri9htaf-way (ROW). These are rid intended fo, nor do they waive or madily any rights KMG may have under existing easements or ROW agreements. For information regarding KMG's rights end requirements as they pertain to the existing easements, please reference existing easements and amendments documents. This list of requirements is applicable for KMG fedlities on easements antl in roatl rights of ways only. Encroachments on fee property should be referted to the Land 8 ROW Department. Any reference to KMG in the below requirements is meant to indude and apply to any Kert McGee entity. Design • KMG shall be provided suffident prior notica of planned activities involving excavation, blasting, or any type of consVUdion on KMG's ROW or near its fedlities. This is to determine and resolve any location, grade ar encroachment prohlems and allow for the protection of KMG's facilities and the generel public. This prior notification is to be made before the actual work is to take place. • The envoaching entity shall provide KMG with a set of drawings for review and a sal of final censtmdion drawings showing all aspects of the proposed facilities in the vicinity of KMG's ROW. The envoaching entity shall also provide a set of'as-built drawings' and submit to KMG, showing the fedlities in the vidnity of KMG's ROW upon completion of the work. • Only fedlities shown on tlrewings reviewetl by KMG will be approved for installation on KMG's ROW. All drawing revisions that effect fedlities proposed to be placetl an KMG's ROW must be epprovetl by KMG in writing. • KMG shall approve the design of a!I permanenf road crossings. • Any repair to surface facilities following future pipeline maintenance or repair work 6y KMG on It's'Drior tights' ROW will be at the expanse of the developer or landowner. In addikan, any repair to surface fadliges following future Pipeline maintenance or repair work by KMG on replacement ROW grentetl to relocate KMG fadlges will also be tlone at the expense of the developer or landowner unless errpressly addressed in surface use agreements and eDProved U writing by KMG. • The depth of cover over the KMG pipelines shall not De increased or reducad nor suKeca modified far drainage wkhout KMG's written approval. • ConsWction of any permanent sVUdure within KMG pipeline easement is not permitted without written approval by KMG. • Planting of shrubs antl Vass is not permitted on KMG pipeline easement without written approval by KMG. • Irrigation equipment i.e. badcflow prevent devices, meters, valves, valve bozos, etc. shall not be located on KMG easement without written approval by KMG. • Foreign utility installations, IE, tliskibution gas, oil and Bas gathering, water, electrie, telephone, cable and sewer lines, etc., may uoss perpendialar to KMG's pipeline wimin the ROW, provided that a minimum of eighteen Inches (18~ of vertical dearance is maintainetl 6etwean KMG pipeline(s) and the foreign uGliry. Any installation by a foreign utility wim less than 18' of vertical separation is not allowed without written eDProvel by KMG. In no case will vaRical separation be leas than 12' whether written ar cwt. Constant line elevations must be maintained across KMG's entire ROW width, gravity drain lines are the only exception and must be epProved in writing. Foreign line crossings below the KMG pipeline must be evaluated . by KMG to ensure that a significant lengm of the KMG line is not exposed and unsupported during cencWdion. Foreign line crossings above the KMG pipeline with less than 18' of dearence must be evaluated by KMG to ensure that addttlonel support is not necessary to prevent settling on lop of the KMG nature) gas pipeline. A KMG representative must be on eke during any crossing activities to verify dearence depths and to assure the integrity and support of the KMG fadlity. All installations of foreign crossings done by boring and or jacking require me KMG facility to be exposed to verity ctearencas. • Foreign utilities shall not run paallel to KMG pipelines within the KMG easement wimout written permission by KMG. A minimum of 10.0 feel of horizontal separation must ba maintained in parallel installations whether the foreign utility is placed within the KMG easertrent or adjacent to the KMG easement. Any deviatlon from Ne f0.0' horizontal requirement must be approved in canting by KMG end en'as built survey provided to KMG sear installation. • The foreign utility should be atlwsed that KMG maintains caNodic protection on its pipelines and fadliges. The foreign utility must coordinate their naNOdic proteLtion system with KMG's. At the request of KMG, foreign uliliges shall install far allow to be Installed) cathodic protection test leads at all vossings for lha purposes of monitoring cathodic protection interference. The KMG~CP technidan end the foreign utility CP tachnidan shall perform post construcion CP interterenca testing. Interference issues shall be resolved by mutual agreement between foreign utility and KMG. All coals asaodated with the cortedion of camotlic protection intederenca issues on KMG pipelines as a result of the foreign utility crossing shall be borne by the foreign utility for a period of one year from tlate the foreign utility is put in service. • The developer shall understand that KMG whether spedfically required per federal law, or by tympany standard, will mark the routing of It's underground fedlities with aboveground pipeline markers and teat leads and maintain those markers and test leads. Markers will be installetl at every point the pipeline route Uanges direction and adequate markers will be installed on straight sections a(pipeline to insure, in the sole opinion of KMG, the safety of the public, contractor, KMG personnel and KMG facilities. • On all foreign utility vossings and / or encroachments, metallic foreign lines shall be coated with a suitable pipe coating (or a distance of et least 10 feet on either side of the crossing. Page 1 of 3 Revision 3/0112004