Laserfiche WebLink
-z- <br />• *If feasible, a simple measurement can be made by using a <br />container of a known volume and a watch. <br />3) Name or initials of person taking sample <br />C. Sample Frequency: Quarterly <br />1) According to the following calendar schedule - January, April, <br />July, and October <br />2) Submit complete results from lab and field to CMLRD as soon as <br />possible after the results of sample analyses are received <br />D. Parameters: <br />1) Temperature (should be measured 1n Field) <br />2) pH (should be measured in Field) <br />3) Total Dissolved Solids (Lab) <br />II. Wells <br />A. Sample Identification: 1) Well B16 <br />2) Well B11 (to be removed upon mining) <br />3) Well PW1 (pumping well-water supply) <br />Note: Please verify well identification and any previous <br />• --~ identification numbers p~•~ i <br />~ also, please locate wells on photocopy of map 4-3 ~ ~ "° s' <br />18. Field Information: <br />li 1) Date sample taken <br />~ 2) Depth to water (DTW) - water level reading measured from top of <br />casing, then adjusted to ground level - i.e. subtract from <br />reading the amount of casing above ground at each well site. <br />Note: Avoid taking water level readings at pumped well while <br />pumping or within 12 hours of pumping. Take water level reading <br />before taking sample. <br />3) Name or initials of person taking sample. <br />C. Sample Frequency: Quarterly - same as required for springs <br />D. Parameters: <br />1) <br />2) <br />3) <br />4) <br />5) <br />• 6) <br />7) <br />8) <br />9) <br />10) <br />11) <br />Temperature (Field) <br />pH (Field) <br />Total Dissolved Solids <br />Calcium <br />Iron <br />Magnesium <br />Manganese <br />Sodium <br />Bicarbonate <br />Chloride <br />Sulfate <br />