GENERAL55334 - Laserfiche WebLink

Home Browse Search

1) Before commencement of injection, the operator shall run a baseline temperature survey from the base of the surface casing to TD to establish baseline temperature conditions for comparison v.ith subsequent mechanical integrity testing to detect fluid flow adjacent to the casing; and 2) Before commencement of injection, the operator shall run a radioactive tracer survey (RATS) to verify that fluids are confined to the injection zone and to establish the injection profile associated with the perforations. The final portion of the temperature survey shall be run afrer injection has commenced (Part II, Section A. 5(d) of the Permit). The permittee shall notify the EPA at least two (2) weeks prior to conducting these tests so that an authorized representative maybe present to witness the test. The permittee is required to submit the results of these tests along with a Completion Report (EPA Forth 7520-12) and the daily drilling, casing, and completion record(narrative, along with copies of all well logs and the procedures and results for all additional tests. Please be aware that American Soda LLP. does not have authorization to begin injection into the Getty # J-7LR' until the items listed above have been approved by the EPA and the company, has received ~~ritten authorization to begin injection from the EPA. ]t is American Soda's responsibility to be familiar with, and to comph~ ~~ ith, all conditions contained in this Permit. If you have any questions on this action please contact Paul S. Osborne at 800.227.8917, extension 6125. Also direct all correspondence and/or reports to ATTENTION: Paul Osborne AT MA1L CODE 8P-V1'-GOV. Thank you for your continued cooperation. ---•~~~ e an G. Clough Assi tant Regional Administrator Office of Partnerships and Regulatory Assistance Enclosures: Draft Permit Statement of Basis Page 2 of 3