GENERAL42646

• Permit No: C1981014
• IBM Index Class Name: General Documents
• Doc Date: 2/1/1991
• Doc Name: PROPOSED DECISION & FINDINGS OF COMPLIANCE FOR PR1
• Permit Index Doc Type: FINDINGS
• Media Type: D
• Archive: No

r~
Stipulation No. 12
`J
PRIOR TO AFFECTING THE LAND IN THE SOUTHWEST 1/4 SECTION 23, TOWNSHIP 20
SOUTH, RANGE 70 WEST, THE OPERATOR SHALL SUBMIT RIGHT OF ENTRY
INFORMATION FROM THE OWNER.
Stipulation No. 13
WITHIN 90 DAYS OF APPROVAL OF PERMIT REVISION N0. O1, THE OPERATOR SHALL
SUBMIT DOCUMENTATION THAT APPLICATION FOR A WELL PERMIT FOR THE
"NORTH DEWATERING WELL" HAS BEEN FILED WITH THE OFFICE OF THE STATE
ENGINEER.
Stipulation No. 14
PEAK FLOWS SHALL BE MEASURED IN MAGPIE CREEK ON A QUARTERLY BASIS AT THE
CURRENT MONITORING STATION. DATA ACQUIRED FROM THIS MONITORING SHALL BE
SUBMITTED QUARTERLY AND INCLUDED IN THE ANNUAL HYDROLOGY REPORTS FOR THE
MINE.
Stipulation No. 15
THE OPERATOR SHALL MONITOR FLOWS IN SECOND ALKALI CREEK SO AS TO MEASURE
MINIMUM AND MAXIMUM FLOWS DURING EACH QUARTER FOLLOWING APPROVAL OF
PERMIT REVISION N0. 1. DURING THE MONITORING YEAR, AT LEAST ONE GRAB
SAMPLE SHALL BE COLLECTED WHEN STREAMFLOW IS PRESENT. THIS SAMPLE SHALL
BE SUBMITTED FOR LAB ANALYSIS FOR TOTAL DISSOLVED SOLIDS, TOTAL SUSPENDED
SOLIDS, pH, TOTAL DISSOLVED IRON AND MANGANESE. RESULTS OF THESE
ANALYSES SHALL BE SUBMITTED TO THE DIVISION WITHIN 60 DAYS FOLLOWING THE
END OF THE FIRST MONITORING YEAR WHICN ENDS ON JUNE 30, 1992.
Stipulation No. 16
WITHIN 30 DAYS OF APPROVAL OF PERMIT REVISION N0. 1, THE APPLICANT SHALL
SUBMIT TO THE DIVISION THE FOLLOWING DEMONSTRATIONS FOR THE SMALL AREA
EXEMPTIONS WITHIN THE PERMIT AREA: 1) A DEMONSTRATION THAT SEDIMENT PONDS
OR TREATMENT FACILITIES ARE NOT NECESSARY FOR DRAINAGE FROM THE AREA TO
MEET EFFLUENT LIMITATIONS, AND 2) A DEMONSTRATION THAT THE AREA IS SMALL
AND THAT THERE IS NO MIXTURE OF SURFACE DRAINAGE WITH MINE WATER
DISCHARGE.
Stipulation No. 17
WITHIN 120 DAYS OF PERMIT REVISION APPROVAL, THE APPLICANT SHALL SUBMIT
DESIGNS FOR THE MAGPIE CREEK CHANNEL IN COMPLIANCE WITH THE REQUIREMENTS
OF RULE 4.05.4. THE DESIGNS SHALL INCLUDE PLAN VIEWS, LONGITUDINAL
PROFILE, CROSS-SECTIONS AND CHANNEL PROTECTION DETAILS IN ORDER TO MEET
THE REQUIREMENTS OF RULE 4.05.4(4).
-3-