Laserfiche WebLink
<br />ROADABLE EQUIPMENT: <br />------------------ Total Eqp. Fleet Size Haul Trip Return Trip <br />Machine Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />____________________________________________________________________ <br />Subtotals 50.00 50.00 <br />MOB/DEMOB SUPPORT EQUIPMENT: --------- --------- <br />sheet 2 of 2 <br />--------------------------- Height Ownership Haul Rig Fleet Size Haul Trip Return Trip DOT Permit <br />Non-Roadable Eqp. Description (tons) Cos[/hr Cast/hr (no. hauled) Cast/hr Cost/hr Cost/ea <br />_ _ __________________________Subtotals__________ 50.00__________50.00________50.00 <br />Total Eqp. Fleet Size Haul Trip Return Trip <br />Roadable Eqp. Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />_______________________________________________________________________________________________________ <br />_______________________________________________________________________________________________________ <br />______________________"__-__-__-----Subtotals-,-_°_____50.00 ___'_'___50.00 <br />EQUIPMENT HAUL DISTANCE 8 T[ME ~. <br />Nearest major city or town within project area region: Palisade <br />Total one way travel distance = 4.0 miles. Average travel speed = 20.00 mph. <br />______ _____________ <br />Job Time - Non Roadable Equip.= 0.50 hours load Roadable Equip.= N/A hours load <br />0.20 hours haul 0.20 hours haul <br />0.50 hours unload N/A hours unload <br />0.20 hours return 0.20 hours return <br />JOB COST Total Mob/Demob Cost = fb86.52 <br />_________ _____________ <br />NOTE: Non-roadabLe equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul and a one-way empty return. Roadable equipment (nc haul rig required) <br />costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits are required for each rig on each loaded trip. <br />Additionally, pilot cars (one or two per rig depending an degree of oversize) are also required for oversize <br />equipment hauling, and loading/unloading times must be increased substantially for equipment which must be <br />partially dismantled for transport and re-assembled at the job site. Casts for lifting equipment and other <br />support equipment needed for this work should be included in the mob/demob costs. <br />