Laserfiche WebLink
<br />1.01 SUMMARY: <br />This SPECIFICATION describes requirements for the manufacture, fabrication (if neededl, <br />supply, and installation of geogrid over potential mine workings, as shown on the <br />DRAWINGS; and construction quality control monitoring and testing. All procedures, <br />operations and methods shall be in strict compliance with the SPECIFICATIONS, <br />Construction Quality Assurance Plan, and the DRAWINGS. <br />1.02 REFERENCES: <br />A. ASTM D1238 -Test Method for Flow Rates of Thermoplastics by Extrusion <br />Plastometer (Condition 190/2.161. <br />B. ASTM D1248 -Specification for Polyethylene Plastics Molding and Extrusion <br />Materials. <br />C. ASTM D1388 -Test Method for Stiffness of Fabrics. <br />D. ASTM D1505 -Test Method for Density of Plastics by the Density-Gradient <br />Technique. <br />E. ASTM D1682 -Test Methods for Breaking Load and Elongation of Textile Fabrics. <br />F. ASTM D1777 -Method for Measuring Thickness of Textile Materials. <br />G. ASTM D4218 - Test Method for Carbon Black Content in Polyethylene <br />Compounds by the Muffle-Furnace Technique. <br />H. ASTM D4595 -Test Method for Tensile Progenies of Geotextiles by the Wide- <br />width strip method. <br />I. GRI1 -Test Method GG1 -Geogrid Tensile Strength. <br />J. GRI -Test Method GG2 -Geogrid Junction Strength. <br />K. GRI -Test Method GG3 -Creep Behavior and Long Term Design Loads of Geogrid. <br />L. ASTM D3776 -Test Method for Mass Per Unit Area (Weight) of Woven Fabric <br />(Option CI. <br />M. 1996 Technical Specifications and CQA Plan for the Cresson project. <br />1.03 SUBMITTALS: <br />CONTRACTOR shall provide the following information relating to the geogrid MANUFACTURER <br />and INSTALLER prior to commencement of the WORK: <br />A. Information from the MANUFACTURER including company name, address, <br />telephone number, and the names of the company president and quality control <br />manager. <br />March 22, 1996 Section 02776.1 <br />02276.1-1 Geogrid <br />Revision 1 <br />