GENERAL34916 - Laserfiche WebLink

Home Browse Search

The netting shall be installed in conformance with manufacturer's specifications. Netting shall be rolled over the slope in the direction of water flow and stapled in place with 6" wire staples. Staple pattern and density shall be in conformance with manufacturer's recommendations for given slope length/gradient combinations. The uphill end of each roll shall be anchored by burying the end of the roll with approximately 6' of cover material. 4. Hydromulch with tackifier Hydromulch shall be applied at a rate of one and a half (1 1/2) tons per acre. Mulch shall be applied after seeding and not later than 24 hours after seeding. Hydromulch shall consist of a virgin wood fiber mulch manufactured from 100% whole wood chips. A minimum 30% of the wood fibers shall be 0.15 inches or longer. The wood fiber shall contain a water-soluble non-toxic dye to insure uniform application. The hydromulch shall include a non-asphalt tackifier to be applied at a rate of 60 pounds per acre or according to manufacturer's recommendations. MAINTENANCE The CONTRACTOR shall maintain the areas until all work on the entire contract has been completed and accepted. Maintenance will consist of repair of damage caused by wind or water erosion, fire or other causes. Such areas shall be repaired to reestablish the condition and grade of the seedbed and shall be fertilized, reseeded, and remulched as directed by the PROJECT MANAGER. MEASUREMENT AND PAYMENT There will be no measurement for payment made for this bid item. Payment shall be made for the lump sum bid price. The Division has estimated the approximate acreage to be revegetated (Exhibit 2>. However, bidders are responsible for making their own acreage determinations. The price bid shall include all of the CONTRACTOR'S cost of labor, material, equipment and all other items necessary to complete the above described work in accordance with the specifications. PROJECT OBSERVATION The PROJECT MANAGER will be at the project site periodically to monitor construction activities and ensure that each work item is completed and constructed to design specifications. The PROJECT MANAGER will be available during regular business hours (8:00 a.m. to 5:00 p.m.) on weekdays. Inspections will not be scheduled on weekend days or holidays without prior approval of the PROJECT MANAGER. The following items must be observed and approved by the PROJECT MANAGER before proceeding with additional work: Final grading of site prior to topsoil application. 2. Completion of fertilization and seeding prior to mulch application. 3. "Miramat" installation at the No Name Drainage stabilization area. -13-