Laserfiche WebLink
<br /> <br />(iii) whenever there is a change in the source of <br />injection fluids. A comprehensive water <br />analysis shall be submitted to the Director <br />within thirty (30) days of any change in <br />injection fluids. <br />(b) For injection activities: continuous observations <br />of fluid temperature, flow rate, injection <br />pressure, and cumulative volume. Maximum and <br />minimum values for all parameters shall be <br />recorded on a daily basis. All parameters shall <br />be reported quarterly, as specified under Part II, <br />Section D. 5.; <br />(c) Continuous observations of depth to the air/fluid <br />interface within the tubing/casing annulus, and <br />tubing/casing annulus pressure, in accordance with <br />Part :[I, Section C. 4. (b)(i). Annulus pressure <br />and depth to air/fluid interface shall be recorded <br />four (4) times daily, and at the same time as <br />other parameters. All parameters shall be <br />reported quarterly, as specified under Part II, <br />Section D. 5.; <br />(d) For production activities: perform observations <br />of fluid temperature and fluid density. Maximum <br />and m:Lnimum values for each parameter shall be <br />recorded daily. Each parameter shall be reported <br />quarterly, as specified under Part II, Section D. <br />5.; <br />(e) Continuous monitoring of the effectiveness of the <br />gel in the long string/wellbore annulus, which <br />shall include measurements of any fluid movement <br />within the gel. This parameter shall be recorded <br />continuously and reported quarterly, as specified <br />under Part II, Section D. 5.; and <br />(f) Daily monitoring of the density of both produced <br />and injected fluids. <br />The permittee may <br />paragraph (a)(11), abo <br />reduced frequency wi:Ll <br />the injected fluids or <br />frequency shall not be <br />parameters in (a)(111, <br />request that the frequency of analysis in <br />ve, be reduced after the first year if the <br />yield data representative of the nature of <br />the injection pressure. The reduced <br />less than once per year for those <br />above. <br />The permittee shall submit a final monitoring plan <br />containing actual dei:ails as to how the data, required in Part <br />II, Section D. 1. (bl through (f ), will be recorded. Any plans <br />shall be submitted prior to commencement of injection operations. <br />Page 14 of 61 <br />EPA Permit Mo. COS2358-0696 <br />