2004-10-18_REVISION - M1980244 ‎(24)‎

• Permit No: M1980244
• IBM Index Class Name: Revision
• Doc Date: 10/18/2004
• Doc Name: Ph.IVc VOL.II Tech Specs
• From: Golder Associates Inc.
• To: DMG
• Type & Sequence: AM8
• Media Type: D
• Archive: No

® coordination of all construction activities associated with the various
CONTRACTOR(S);
• ®scheduling and coordinating construction activities with required CQA testing and
activities;
® overseeing the construction quality control operations performed by the
CONTRACTOR(S);
® approve specific corrective measures to be implemented during construction when
deviations from the SPECIFICATIONS occur;
® ensure that required quality control testing has been performed in accordance with the
CQA Plan and to the satisfaction of the CQA Monitor; and
® ensure that the CQA personnel aze provided with all documentation required in the CQA
Plan and project SPECIFICATIONS.
2.03 DESIGN ENGINEER:
In this CQA Plan the DESIGN ENGINEER refers specifically to Golder Associates Inc. The
DESIGN ENGINEER is the individual or fum responsible for the design and prepazation of the
project construction DRAWINGS and project SPECIFICATIONS. The DESIGN ENGINEER is
responsible for approving all design and project SPECIFICATION changes, modifications, or
clazifications encountered during construction.
• 2.04 CERTIFYING ENGINEER:
In this plan, CERTIFYING ENGINEER refers specifically to (To Be Determined). CERTIFYING
ENGINEER is the individual or fum responsible for certifying the construction was performed in
compliance with the DRAWINGS and SPECIFICATIONS. MANAGER and CERTIFYING
ENGINEER will be responsible far the resolution of all quality assurance issues.
2.05 CONSTRUCTION QUALITY ASSURANCE MONITOR:
The Construction Quality Assurance Monitor, also referred to as the "CQA Monitor", is the fum or
individual responsible for performing the CQA tasks outlined in this plan. The CQA Monitor is [he
official CQA representative of CCBr V and has the responsibility of overseeing the CQA aspects of the
project. In this CQA Plan the CQA Monitor is associated with the CERTIFYING ENGINEER and
refers specifically to (To Be Determined). The CQA Monitor has the authority to stop any aspect of
the work that is not in compliance with the CQA Plan. Work would then be resumed once corrective
action has been approved by the MANAGER and CERTIFYING ENGINEER. The specific
responsibilities of the CQA Monitor include:
® review the design DRAWINGS, project SPECIFICATIONS, and related guidance
documents;
® review all CONTRACTOR QC submittals and make appropriate recommendations;
® observe geosynthetic material delivery, unloading, and storage;
• ®obtain and test geosynthetic conformance samples during geosynthetics manufacture;
Section 01400.2 Page 2 of 11 Mazch 22, 2000
Geosynthetic CQAPIan Golder Associates Revision 5
!:\04JOB5\043-1110UVC CERTa'ICATION REPORTPHASE IVC OSA CERTNPPENDICIES\APPENDD(E TECFIIJ[CAL SPECa1CA'i]ONS\014002RS.DOC