_REVISION - M1980244 ‎(30)‎

• Permit No: M1980244
• IBM Index Class Name: Revision
• Doc Name: Appendix E
• From: Cripple Creek & Victor Gold
• To: DMG
• Type & Sequence: AM8
• Media Type: D
• Archive: No

SECTION 02777.0 GEOTEXTILE

PART 1: GENERAL
1.01 SUMMARY:
This SPECIFICATION describes requirements for the manufacture, supply, and installation of the geotextile in the
Underdrains, and Leak Detection System, as shown on the DRAWINGS; and construction quality control
monitoring. All procedures, operations and methods shall be in strict compliance with the SPECIFICATIONS, the
Construction Quality Assurance Plan, and the DRAWINGS.
1.02 SUBMITTALS:
A. Submittals With Bid Documents
CONTRACTOR shall provide the following information relating to the geotextile MANUFACTURER with its
proposal.
Information from MANUFACTURER including company name, address, telephone
number, the names of the company president and quality control manager, and narrative
of the company history.
2. Description of MANUFACTURER'S manufacturing capabilities:
•
a. Information on plant size, equipment, personnel, number of shifts per day, and
capacity per shift.
b. A list of standard material properties and test methods employed to amve at
the values for each. As a minimum, the list shall include properties given in
Part 2 ofthis Section.
3. The Qualiry Control Manual followed during the manufacturing process including those
for the polymer material and for detecting foreign objects in the fmished goods, and a
description of the quality control laboratory facilities, including the name and telephone
number of the quality control manages Upon review of the Quality Control Manual,
the MANAGER and CERTIFYING ENGINEER may request additional testing
during the manufacturing process at no additional cost to CC&V.
B. CONTRACTOR shall provide the following information after contract award but within ten
(10) days prior to material arrival on-site and prior to commencement of the work:
1. The geotextile MANUFACTURER shall provide written certification that the geotextile
to be used meets the requirements of the Cresson Project and has been continuously
inspected for the presence of needles and geotextile was found to be needle free.
2. A copy of the MANUFACTURER'S geotextile QC test results of properties outlined in
Part 2 of this Section. The MANAGER reserves the right to refuse use of any
geotextile supplied without the proper QC documentation.
3. A detailed list of performance criteria for the geosynthetic material being produced for
this project. (Note: Performance criteria are sometimes referred to as "minimum
property values". Refer to Part 2 of this Section for geotextile properties and test
methods.)
• 1.03 QUALITY ASSURANCE:
Section 02777 Page 1 of 5
Geotextile Golder Associates
^ ~PHASEN PSSA CERPAPPENDICIESWPPENDix E TECFMICAL SPECIFICATIONSb2]]]R2.nnC
December 9, 1998
Revision 2