Laserfiche WebLink
I,~ (4) Off-site wells will continue to be sampled on a semi- <br />annual basis; and <br />(5) All surface water monitoring systems (RS-1 through RS-6) <br />and ground water monitoring stations (D87-24, M-1, M-2, <br />M-4, M-6, M-7, M-8, M-9, M-10 and M-11) will continue to <br />' be sampled on a quarterly basis. <br />' The bi-weekly monitoring station <br />arameters shown in Table 1 <br />th samples will be analyzed <br />bi- <br />kl for the <br /> p <br />, e wee <br />y process system samples <br /> will be analyzed for WAD and tota l cyanide, and five metal species <br />' (copper, zinc, iron, calcium and sodium), the bi-weekly ly simeter <br /> samples will be analyzed for the parameters shown in Table 2, the <br />off-site wells will be sampled and analyzed for the parameters <br />shown in Table 3 and the quarterly monitoring station safiples will <br />be analyzed far the parameters shown in either Table 1 oY Table 4, <br />as applicable (January and July samples analyzed for Table 4 <br />parameter list and April and October samples analyzed for Table 1 <br />parameter list). <br />This document presents the quality assurance/quality control <br />(QA/QC) protocols that will be followed in sample handling and <br />' collection, as well as in the analytical process, to obtain <br />representative results at each of the sampling points. <br />Section 2 of this manual presents the protocols for ground water <br />' sample collection and handling, Section 3 presents the protocols <br />for surface water sample collection and handling, Section 4 <br />presents the protocols for porous cup lysimeter sample collection <br />~ ' and handling, Section 5 presents the protocols for analysis of <br />surface water and ground water samples and Section 6 presents the <br />' protocol for analysis of porous cup lysimeter samples and process <br />samples. <br /> -3- <br />' I <br />