1992-11-01_REVISION - M1988112

• Permit No: M1988112
• IBM Index Class Name: Revision
• Doc Date: 11/1/1992
• Doc Name: QUALITY ASSURANCE QUALITY CONTROL PROTOCOLS FOR THE COLLECTION OF SURFACE & GROUND WATER QUALITY DA
• Type & Sequence: TR6
• Media Type: D
• Archive: No

1
listed as 0.04 mg/L in N.J.A.C. 7:9-6.1 et seq., Table 3, given in
Appendix F.
No precision or accuracy data are given for the autoanalyzer, USEPA
Method 9012. Based on the data from Appendix G and project
experience in the western United States, PQL values are likely to
' be similar to the manual USEPA Method 9010.
6.6 Reaortin~
Unless there is insufficient sample for any water quality analysis
to be performed (as in condition 1, Section 6.1), then the
analytical laboratory will produce a report which comprises:
{1) A statement of the laboratory test results, and
' (2) A quality assurance report.
' The report will be prefaced by a sheet which identifies the
analytical laboratory, the laboratory job number, the client and
' the date of the report. Certification is provided by the inclusion
of this page which will be signed and dated by an authorized
representative of the analytical laboratory together with their
' title. If any of the analytical results fail to conform with the
approved permit standards, Battle Mountain will, within 5 working
' days of receipt of the analytical data, notify the Division.
6.6.1 Analytical Results Report: The analytical test results will be given
on laboratory data sheets which contain the following information:
' (1) The date of the report and the laboratory performing the
analysis;
(2) The client identification number, the name of the client
' and the laboratory identification number;
' -43-