Laserfiche WebLink
MINING PLAN <br />3. The depth of mining will be as deep as necessary to remove the sand resource. <br />(Tl:e fol[owiag applies to lowlands only: If water is encountered, no further mining <br />will occur, unless augmentation for evaporative losses have been accounted for as <br />required by law.) <br />26. Haulage of the sand to the processing plant or out of the site for processing elsewhere <br />will only occur along established transportation routes. Cross-country driving will not occur <br />due to the possibility of spreading noxious weeds. <br />See page 36. <br />27. All drivers will observe speed limits and drivers must be aware of wildlife on the road. <br />Wildlife always has the right-of--way. <br />See page 36. <br />28. If a new haulage route is needed to access a mining area and remove materials, then that <br />new road will become a transportation corridor and all weed control requirements will apply to <br />that road. If the roadway is subsequently reclaimed, then the reclamation plan weed control <br />requirements will apply. Prior to establishing new roadways, the entire road route will be <br />treated for noxious weeds not less than five days prior to constructing the roadway. <br />Furthermore, for new haulage routes that do not go through mined areas (along the edge of a <br />mined area, if possible, so reclamation units are not divided), the ordnance search requirements <br />apply. <br />See page 36. (Also see ordnance safety requirements for new roads on page 21.) <br />29. No operations will occur within 200 feet of any operating oil or gas well or oil or gas lines <br />without FIRST obtaining permission from the well or pipeline owner and the additional <br />disturbance is also APPROVED by the Colorado State Board of Land Commissioners and the <br />Division of Minerals and Geology (or Mined Land Reclamation Board). Also see setback <br />requirements on page 18. <br />See page 40. <br />Coal Creek Sand Resource Amendment 3 (2005) - M-1988-044 Exhibit D Page 6 <br />