2003-03-12_REVISION - M1977392

• Permit No: M1977392
• IBM Index Class Name: Revision
• Doc Date: 3/12/2003
• Doc Name: Adquacy Letter
• From: DMG
• To: Acme Brick-Denver Plant
• Type & Sequence: AM2
• Media Type: D
• Archive: No

y,
STATE OF COLORADO
DIVISION OF MINERALS AND GEOLOGY
Department of Natural Resources
1313 Sherman SL, Room 215
Denver, Colorado 80203
Phone: [phone]
FAX: [phone]
March 12, 2003
Mr. Phil McCoy
Acme Brick-Denver Plant
401 Prairie Hawk Dr.
Castle Rock, CO. 80109
Re: Adequacy Lztter, Amendment Application (AM-02), Dawson Mine, M-1977-392
Deaz Mr. McCoy:
DIVISION OF
MINERALS
GEOLOGY
RECLAMATION
MINING•SAFET7
Bill Owens
Governor
Greg E. Walther
Executive Director
Ronald W. Cattany
Division Director
The Division completed a technical review of your Amendment Application. Following are a
few items that need to be addressed in order to meet the minimum requirements of the
Act/Construction Rules and Regulations.
Pursuant to Rule 1.10, an amendment application to a permit shall be submitted with the same
content as required for an original application, except that the Applicant will not be required to
submit any information which duplicates applicable previous submittals. However, the Applicant
shall clearly describe where in the original application and supporting documents the information
not included in the amendment application, but necessary to render the amendment technically
adequate, may be found. If any of the below noted items have already been addressed in the
original permit application, or any subsequent permit revision, please clearly describe where the
information can be found.
Only those items that need to be addressed are listed:
Exhibit C -the Mining Plan Map is not signed pursuant to requirements of Rule
6.2.1(2)(b). Please have the qualified person who prepazed the map sign the map.
The Exhibit C map must show the type of vegetation covering the affected lands (Rule
6.4.3(e)).
Does the map boundary identify and outline the permit boundazy or the affected land
boundary (or are the boundaries the same)? Pursuant to Rule 6.4.3, the total azea to be
mined and the area of affected lands must be identified on the Mining Plan Map.
2. Exhibit D - a description of the size and location of each azea to be worked during each
phase should be included in this Exhibit (Rule 6.4.4(e}(ii)).
The Mining Plan should outline the sequence in which each stage or phase of the
operation will be carried out (Rule 6.4.4(e)(iii)).
Describe the major components of the mining operation such as: roads and access routes,
pit, office, shop/maintenance buildings, plant, and processing facilities.