_REVISION - M1980244 (27) - Laserfiche WebLink

Home Browse Search

Phase IVb Weekly Summary No. 4 Page 3 003-2203 Field Monitoring and Testing Activities Golder observed construction activities associated with Phase IV earthworks. All construction materials and soil materials placed were verified as suitable, and construction methods were in accordance with project specifications. Removal of oversized and deleterious material from all fill areas was observed. Golder observed Structural Fill (SF) placement in Phase IV for materials, lift thickness, moisture content, and compactive effort. Golder observed placement of SLF and BF in Phase IVb for subgrade preparation, thickness, compaction, moisture content, and materials. Golder conducted eleven in-situ density and moisture content tests to verify SLF placed complied with the specifications. Golder observed five depth verification tests performed by Ames. Golder observed and documented remediation activities associated with the Phase IV underground working construction. Workings were designated as "Shallow or Deep" as defined in the drawings. Golder observed placement of CSB and CR for underground working remediaion. These materials were placed in accordance with the drawings and specifications into excavated or open underground workings. Golder previously obtained samples of SF, Select Structural Fill (SSF), CR, and Concrete Plug (CP) for laboratory testing. Materials supplied met specifications. Golder observed excavation of the geomembrane anchor trench for proper dimensions. • Golder observed geomembrane deployment, documenting ambient air temperature, panel dimensions, seaming, tie-in overlap, and seam testing (trial seams, pressure, vacuum, and destructive). Geomembrane placed in Phase IVb met specifications. Golder observed and documented confirmation drilling activities associated with the Phase IV construction. Full-time monitoring was given to confirmation drilling of underground workings, including logging holes, marking drill locations, surveying holes, and documenting underground workings encountered. Golder observed excavation of the LDT in Phase IVb for proper dimensions and slope. Excavation met the requirements of the drawings. Golder observed the placement of DCF in the Phase IVb area. Golder had one CQA monitor per dozer to observe DCF placement. Laboratory Tests Golder obtained one sample of Structural Fill (SFb-14) and one sample of Bedding Fill (BFb-02) for laboratory testing. The samples tested met the requirements of the specifications and results are presented in Attachment B. Phase I Vb 04 On I3 .6 Golder Associates Inc.